- Home/
- Comparison/
- Wheel-Mounted Loader/
- Case 921E vs. Case 321E
Case 921E vs. Case 321E
21 reasons to buy Case 921E:
Sizes
Clearance | 489 mm and 330 mm | 33 % more or 159 mm |
Radius at maximum lifting and unloading | 1270 mm and 888 mm | 30 % more or 382 mm |
Shovel
Bucket capacity with top | 4.4 m3 and 1.1 m3 | 75 % more or 3.3 m3 |
Unloading ground clearance at maximum lifting | 3080 mm and 2635 mm | 14 % more or 445 mm |
Operation
Generator current strength | 95 amperes and 55 amperes | 42 % more or 40 amperes |
Fuel Capacity | 393.7 l. and 100 l. | 75 % more or 293.7 l. |
Hydraulic system fluid volume | 242 l. and 74 l. | 69 % more or 168 l. |
Engine oil volume | 36.9 l. and 10 l. | 73 % more or 26.9 l. |
Front axle / differential fluid volume | 47.3 l. and 8 l. | 83 % more or 39.3 l. |
Rear axle / differential fluid volume | 47.3 l. and 8 l. | 83 % more or 39.3 l. |
Static tipping weight | 19319 kg and 4420 kg | 77 % more or 14899 kg |
Motor
Displacement | 10.8 l. and 3.1 l. | 71 % more or 7.7 l. |
Maximum torque | 1373 Nm and 265 Nm | 81 % more or 1108 Nm |
Cylinders number | 6 and 4 | 33 % more or 2 |
Effective power | 221 kW and 53.5 kW | 76 % more or 167.5 kW |
Full power | 204 kW and 56 kW | 73 % more or 148 kW |
Hydraulic system
Pump bandwidth | 162.1 l/min and 73 l/min | 55 % more or 89.1 l/min |
Gear box
Forward gears number | 4 and 2 | 50 % more or 2 |
Reverse gears number | 3 and 2 | 33 % more or 1 |
Maximum forward speed | 37.4 km/h and 20 km/h | 47 % more or 17.4 km/h |
Maximum reverse gear | 25.8 km/h and 20 km/h | 22 % more or 5.8 km/h |
5 reasons to buy Case 321E:
Operation
Turn radius | 4132 mm and 6870 mm | 40 % less or 2738 mm |
Motor
Power measured at | 2300 rev / min and 1800 rev / min | 22 % more or 500 rev |
Torque measured at | 1600 rev / min and 900 rev / min | 44 % more or 700 rev |
Hydraulic system
Lifting time | 6 sec and 6.2 sec | 3 % less or 0.2 sec |
Unloading time | 1 sec and 3.6 sec | 72 % less or 2.6 sec |
Neutral reasons:
Sizes
Length with bucket on ground level | 8800 mm and 5755 mm |
Between tyres width | 2987 mm and 1978 mm |
Height to cab upper part | 3700 mm and 2785 mm |
Wheelbase | 3400 mm and 2350 mm |
Hinge axis maximum height | 4280 mm and 3459 mm |
Shovel
Shovel width | 3170 mm and 2100 mm |
Operation
Operating voltage | 24 V and 12 V |
Rear axle oscillating | 24 degrees and 24 degrees |
Tyre size | 26.5 x 25 L3 with diagonal cord and 405/70 R20 |
Working weight | 22962 kg and 5896 kg |
Motor
Manufacturer | Cummins and Deutz |
Model | QSM 11, 3 level and BF4M2011 2 level |
Hydraulic system
Type of pump | in the middle position with locking with pressure / flow compensation and Open-centered with pressure/flow compensation |
Overflow valve pressure | 24821 kPa and 25000 kPa |
Lowering time | 3 sec and 3 sec |
Gear box
Transmission type | 4 forward / 3 reverse gears proportional with electronic control module and Hydro-Static Transmission |
Images
Sizes
6. Hinge axis maximum height | 4280 mm | 6. Hinge axis maximum height | 3459 mm |
8. Radius at maximum lifting and unloading | 1270 mm | 8. Radius at maximum lifting and unloading | 888 mm |
1. Length with bucket on ground level | 8800 mm | 1. Length with bucket on ground level | 5755 mm |
2. Between tyres width | 2987 mm | 2. Between tyres width | 1978 mm |
3. Height to cab upper part | 3700 mm | 3. Height to cab upper part | 2785 mm |
4. Wheelbase | 3400 mm | 4. Wheelbase | 2350 mm |
5. Clearance | 489 mm | 5. Clearance | 330 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 3080 mm | 7. Unloading ground clearance at maximum lifting | 2635 mm |