vs.

      Doosan DL200 vs. Liebherr L574 2 plus 2

      7 reasons to buy Doosan DL200:

      Shovel

      Breakout power 23149 pound and 39341.6 pound 41 % less or 16192.6 pound

      Operation

      Engine oil volume 27 l. and 23.5 l. 13 % more or 3.5 l.
      Turn radius 5210 mm and 7090 mm 27 % less or 1880 mm

      Motor

      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev
      Torque measured at 1400 rev / min and 1200 rev / min 14 % more or 200 rev

      Hydraulic system

      Unloading time 1.1 sec and 2 sec 45 % less or 0.9 sec

      Gear box

      Forward gears number 4 and 3 25 % more or 1

      16 reasons to buy Liebherr L574 2 plus 2:

      Sizes

      Clearance 550 mm and 445 mm 19 % more or 105 mm

      Shovel

      Unloading ground clearance at maximum lifting 3300 mm and 2730 mm 17 % more or 570 mm
      Bucket capacity with top 4.5 m3 and 1.9 m3 58 % more or 2.6 m3

      Operation

      Hydraulic system fluid volume 240 l. and 115 l. 52 % more or 125 l.
      Fuel Capacity 330 l. and 243 l. 26 % more or 87 l.
      Front axle / differential fluid volume 51 l. and 19.4 l. 62 % more or 31.6 l.
      Rear axle / differential fluid volume 51 l. and 18.4 l. 64 % more or 32.6 l.
      Static tipping weight 18350 kg and 8870 kg 52 % more or 9480 kg

      Motor

      Full power 197.6 kW and 106.6 kW 46 % more or 91.0 kW
      Displacement 10 l. and 5.9 l. 41 % more or 4.1 l.
      Maximum torque 1285 Nm and 686 Nm 47 % more or 599 Nm

      Hydraulic system

      Pump bandwidth 290 l/min and 88 l/min 70 % more or 202 l/min
      Lifting time 5.6 sec and 5.8 sec 3 % less or 0.2 sec
      Lowering time 3.5 sec and 4.1 sec 15 % less or 0.6 sec

      Gear box

      Maximum forward speed 40 km/h and 35 km/h 12 % more or 5 km/h
      Maximum reverse gear 40 km/h and 25 km/h 37 % more or 15 km/h

      Neutral reasons:

      Sizes

      Wheelbase 2900 mm and 3450 mm
      Hinge axis maximum height 3830 mm and 4565 mm
      Length with bucket on ground level 7285 mm and 8980 mm
      Height to cab upper part 3240 mm and 3540 mm

      Shovel

      Shovel width 2550 mm and 3000 mm

      Operation

      Working weight 11645.1 kg and 24250 kg
      Operating voltage 24 V and 24 V
      Rear axle oscillating 22 degrees and 26 degrees
      Tyre size 20.5R25 and 26.5 R 25

      Motor

      Cylinders number 6 and 6
      Aspiration turbocharger and charge air cooling flow by oncoming air flow and Engine with in-line cylinders, water-cooled, with release and exhaust gas turbocharger with intermediate air cooling
      Manufacturer Doosan and Liebherr
      Model DL06 and D 926 TI-E A2

      Hydraulic system

      Type of pump gear type pump and Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit
      Overflow valve pressure 20000 kPa and 35000 kPa

      Gear box

      Reverse gears number 3 and 3
      Transmission type powershift and Stepless hydrostatic travel drive system 2+2

      Images

      Sizes

      1. Length with bucket on ground level 7285 mm 1. Length with bucket on ground level 8980 mm
      3. Height to cab upper part 3240 mm 3. Height to cab upper part 3540 mm
      4. Wheelbase 2900 mm 4. Wheelbase 3450 mm
      5. Clearance 445 mm 5. Clearance 550 mm
      6. Hinge axis maximum height 3830 mm 6. Hinge axis maximum height 4565 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 2730 mm 7. Unloading ground clearance at maximum lifting 3300 mm