vs.

      Dressta 530H vs. John Deere 744K High-Lift

      5 reasons to buy Dressta 530H:

      Sizes

      Clearance 506 mm and 460 mm 9 % more or 46 mm

      Operation

      Hydraulic system fluid volume 165 l. and 159 l. 4 % more or 6 l.
      Transmission fluid volume 31 l. and 27.9 l. 10 % more or 3.1 l.

      Motor

      Torque measured at 1500 rev / min and 1400 rev / min 7 % more or 100 rev
      Power measured at 2000 rev / min and 1500 rev / min 25 % more or 500 rev

      18 reasons to buy John Deere 744K High-Lift:

      Shovel

      Breakout power 171 kN and 13720 kN 99 % less or 13549 kN
      Unloading ground clearance at maximum lifting 3610 mm and 300 mm 92 % more or 3310 mm
      Bucket capacity with top 4 m3 and 2.8 m3 30 % more or 1.2 m3
      Brimmed bucket capacity 3.4 m3 and 2.4 m3 29 % more or 1.0 m3

      Operation

      Static tipping weight 15778 kg and 13570 kg 14 % more or 2208 kg
      Turn radius 6280 mm and 6540 mm 4 % less or 260 mm
      Generator current strength 80 amperes and 70 amperes 12 % more or 10 amperes
      Fuel Capacity 469 l. and 300 l. 36 % more or 169 l.
      Engine oil volume 34 l. and 19 l. 44 % more or 15 l.
      Cooling system fluid volume 45 l. and 24 l. 47 % more or 21 l.

      Motor

      Effective power 226.7 kW and 145 kW 36 % more or 81.7 kW
      Maximum torque 1456.1 Nm and 968 Nm 34 % more or 488.1 Nm
      Displacement 9 l. and 8.3 l. 8 % more or 0.7 l.

      Hydraulic system

      Lowering time 2.8 sec and 4 sec 30 % less or 1.2 sec
      Pump bandwidth 515 l/min and 277 l/min 46 % more or 238 l/min
      Unloading time 1.4 sec and 2.5 sec 44 % less or 1.1 sec

      Gear box

      Maximum forward speed 40 km/h and 37.3 km/h 7 % more or 2.7 km/h
      Maximum reverse gear 30.2 km/h and 26.4 km/h 13 % more or 3.8 km/h

      Neutral reasons:

      Sizes

      Length with bucket on ground level 79900 mm and 9640 mm
      Between tyres width 2100 mm and 2957 mm
      Height to cab upper part 3404.6 mm and 3500 mm
      Wheelbase 3301 mm and 3460 mm
      Hinge axis maximum height 39600 mm and 4800 mm

      Shovel

      Shovel width 300 mm and 3270 mm

      Operation

      Operating voltage 24 V and 24 V
      Working weight 16500 kg and 24733 kg
      Rear axle oscillating 24 degrees and 26 degrees
      Tyre size 23.5x25,20 PR(L-3) and 26.5 R 25

      Motor

      Cylinders number 6 and 6
      Aspiration 4-stroke diesel engine, turbocharging, CAC, direct run, direct injection and Turbocharger with charge air cooler by oncoming air flow
      Manufacturer Cummins and John Deere
      Model C 8.3 and 6090H, III Level III certified

      Hydraulic system

      Type of pump Three multiple vaned cartriges, actuated with auxiliary drive and two variable displacement piston pumps, axial, with load sensing
      Overflow valve pressure 20684.3 kPa and 22669.9 kPa
      Lifting time 5.9 sec and 5.9 sec

      Gear box

      Transmission type Gearbox with electrohydraulic control, switchable under full load with automatic gear changes and Powershift transmission of intermediate type
      Forward gears number 4 and 4
      Reverse gears number 3 and 3

      Images

      Sizes

      1. Length with bucket on ground level 79900 mm 1. Length with bucket on ground level 9640 mm
      2. Between tyres width 2100 mm 2. Between tyres width 2957 mm
      3. Height to cab upper part 3404.6 mm 3. Height to cab upper part 3500 mm
      4. Wheelbase 3301 mm 4. Wheelbase 3460 mm
      5. Clearance 506 mm 5. Clearance 460 mm
      6. Hinge axis maximum height 39600 mm 6. Hinge axis maximum height 4800 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 300 mm 7. Unloading ground clearance at maximum lifting 3610 mm