vs.

      Dressta 560E vs. Liebherr L580 2 plus 2

      10 reasons to buy Dressta 560E:

      Shovel

      Unloading ground clearance at maximum lifting 3480.8 mm and 3300 mm 5 % more or 180.8 mm
      Bucket capacity with top 5.7 m3 and 5 m3 12 % more or 0.7 m3

      Operation

      Fuel Capacity 700 l. and 330 l. 53 % more or 370 l.
      Engine oil volume 49 l. and 23.5 l. 52 % more or 25.5 l.
      Static tipping weight 32672 kg and 20260 kg 38 % more or 12412 kg
      Generator current strength 80 amperes and 55 amperes 31 % more or 25 amperes

      Motor

      Full power 336 kW and 197.6 kW 41 % more or 138.4 kW
      Torque measured at 2000 rev / min and 1200 rev / min 40 % more or 800 rev
      Maximum torque 2102 Nm and 1285 Nm 39 % more or 817 Nm

      Hydraulic system

      Pump bandwidth 530 l/min and 290 l/min 45 % more or 240 l/min

      10 reasons to buy Liebherr L580 2 plus 2:

      Sizes

      Clearance 550 mm and 500 mm 9 % more or 50 mm

      Shovel

      Breakout power 175 kN and 317.7 kN 45 % less or 142.7 kN

      Operation

      Hydraulic system fluid volume 240 l. and 206 l. 14 % more or 34 l.
      Turn radius 7250 mm and 8635 mm 16 % less or 1385 mm

      Motor

      Power measured at 2000 rev / min and 1400 rev / min 30 % more or 600 rev

      Hydraulic system

      Lifting time 5.5 sec and 9.1 sec 40 % less or 3.6 sec
      Unloading time 2 sec and 2.8 sec 29 % less or 0.8 sec
      Lowering time 3.5 sec and 5.6 sec 37 % less or 2.1 sec

      Gear box

      Maximum forward speed 40 km/h and 32.5 km/h 19 % more or 7.5 km/h
      Maximum reverse gear 40 km/h and 32.5 km/h 19 % more or 7.5 km/h

      Neutral reasons:

      Sizes

      Hinge axis maximum height 5053.6 mm and 4560 mm
      Length with bucket on ground level 9829.8 mm and 9000 mm
      Height to cab upper part 4114.8 mm and 3540 mm

      Shovel

      Shovel width 3650 mm and 3300 mm

      Operation

      Operating voltage 12 V and 24 V
      Rear axle oscillating 23 degrees and 26 degrees
      Tyre size 29.5x29,34PR(L-3) and 26.5R25
      Working weight 41980 kg and 24740 kg

      Motor

      Manufacturer Cummins and Liebherr
      Model QSX15 and D 926 TI-E A2
      Cylinders number 6 and 6
      Aspiration Turbocharger with charge air cooling and Turbocharging with intercooler

      Hydraulic system

      Type of pump Gear type driven by the torque converter and Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit
      Overflow valve pressure 6894.8 kPa and 35000 kPa

      Gear box

      Transmission type Electrical control, transmission with full soft shift transmission, controlled by a double cardan joint from the torque converter and hydrostatic 2+2
      Forward gears number 3 and 3
      Reverse gears number 3 and 3

      Images

      Sizes

      1. Length with bucket on ground level 9829.8 mm 1. Length with bucket on ground level 9000 mm
      3. Height to cab upper part 4114.8 mm 3. Height to cab upper part 3540 mm
      5. Clearance 500 mm 5. Clearance 550 mm
      6. Hinge axis maximum height 5053.6 mm 6. Hinge axis maximum height 4560 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 3480.8 mm 7. Unloading ground clearance at maximum lifting 3300 mm