vs.

      Halla HA290 vs. Michigan L480B

      8 reasons to buy Halla HA290:

      Shovel

      Breakout power 156.9 kN and 631.6 kN 75 % less or 474.7 kN

      Operation

      Turn radius 5010 mm and 10388.5 mm 52 % less or 5378.5 mm

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev
      Torque measured at 1500 rev / min and 1300 rev / min 13 % more or 200 rev

      Hydraulic system

      Lifting time 6.6 sec and 11.4 sec 42 % less or 4.8 sec
      Unloading time 1.5 sec and 4 sec 62 % less or 2.5 sec
      Lowering time 2.5 sec and 5.8 sec 57 % less or 3.3 sec

      Gear box

      Maximum forward speed 39 km/h and 32 km/h 18 % more or 7 km/h

      21 reasons to buy Michigan L480B:

      Sizes

      Radius at maximum lifting and unloading 1854 mm and 1025 mm 45 % more or 829 mm
      Clearance 584 mm and 465 mm 20 % more or 119 mm

      Shovel

      Unloading ground clearance at maximum lifting 4724 mm and 2945 mm 38 % more or 1779 mm
      Bucket capacity with top 9.6 m3 and 2.9 m3 70 % more or 6.7 m3

      Operation

      Front axle / differential fluid volume 115.5 l. and 32 l. 72 % more or 83.5 l.
      Fuel Capacity 1423 l. and 286 l. 80 % more or 1137 l.
      Rear axle / differential fluid volume 115.5 l. and 32 l. 72 % more or 83.5 l.
      Hydraulic system fluid volume 939 l. and 112 l. 88 % more or 827 l.
      Static tipping weight 49087.8 kg and 13078 kg 73 % more or 36009.8 kg
      Engine oil volume 102 l. and 18.9 l. 81 % more or 83.1 l.
      Cooling system fluid volume 295 l. and 45 l. 85 % more or 250 l.
      Transmission fluid volume 212 l. and 18 l. 92 % more or 194 l.
      Generator current strength 100 amperes and 70 amperes 30 % more or 30 amperes

      Motor

      Effective power 462.3 kW and 140.9 kW 70 % more or 321.4 kW
      Full power 540.6 kW and 143.2 kW 74 % more or 397.4 kW
      Displacement 28 l. and 8.3 l. 70 % more or 19.7 l.
      Cylinders number 12 and 6 50 % more or 6
      Maximum torque 3203.8 Nm and 824.3 Nm 74 % more or 2379.5 Nm

      Hydraulic system

      Pump bandwidth 957.7 l/min and 252 l/min 74 % more or 705.7 l/min

      Gear box

      Maximum reverse gear 32 km/h and 25 km/h 22 % more or 7 km/h
      Reverse gears number 4 and 3 25 % more or 1

      Neutral reasons:

      Sizes

      Wheelbase 3200 mm and 4623 mm
      Length with bucket on ground level 7600 mm and 12929 mm
      Height to cab upper part 3310 mm and 4877 mm

      Shovel

      Shovel width 2960 mm and 4374 mm

      Operation

      Operating voltage 24 V and 24 V
      Rear axle oscillating 28 degrees and 20 degrees
      Tyre size 23.5x25 16PR and 41.25/70-39 (34PR) L-5
      Working weight 15540 kg and 81274.7 kg

      Motor

      Manufacturer Cummins and Cummins
      Model 6CT8.3C and VTA-28C
      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)

      Hydraulic system

      Type of pump closed center with a discharge pressure and vacuum pump of vane type and Pumps with 3 gears
      Overflow valve pressure 20387.8 kPa and 19477.7 kPa

      Gear box

      Transmission type powershift transmission and Clark 8422 H-206 Powershift transmission of intermediate type
      Forward gears number 4 and 4

      Images

      Sizes

      1. Length with bucket on ground level 7600 mm 1. Length with bucket on ground level 12929 mm
      3. Height to cab upper part 3310 mm 3. Height to cab upper part 4877 mm
      4. Wheelbase 3200 mm 4. Wheelbase 4623 mm
      5. Clearance 465 mm 5. Clearance 584 mm
      8. Radius at maximum lifting and unloading 1025 mm 8. Radius at maximum lifting and unloading 1854 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 2945 mm 7. Unloading ground clearance at maximum lifting 4724 mm