vs.

      Hyundai HL780-9 vs. Liebherr L580 2 plus 2

      13 reasons to buy Hyundai HL780-9:

      Sizes

      Radius at maximum lifting and unloading 1430 mm and 1150 mm 20 % more or 280 mm

      Shovel

      Bucket capacity with top 5.4 m3 and 5 m3 7 % more or 0.4 m3

      Operation

      Rear axle / differential fluid volume 58 l. and 50 l. 14 % more or 8 l.
      Static tipping weight 24200 kg and 20260 kg 16 % more or 3940 kg
      Fuel Capacity 450 l. and 330 l. 27 % more or 120 l.
      Generator current strength 70 amperes and 55 amperes 21 % more or 15 amperes
      Engine oil volume 38 l. and 23.5 l. 38 % more or 14.5 l.

      Motor

      Maximum torque 1674.4 Nm and 1285 Nm 23 % more or 389.4 Nm
      Full power 259.5 kW and 197.6 kW 24 % more or 61.9 kW
      Torque measured at 1400 rev / min and 1200 rev / min 14 % more or 200 rev

      Hydraulic system

      Unloading time 1.4 sec and 2 sec 30 % less or 0.6 sec
      Pump bandwidth 420 l/min and 290 l/min 31 % more or 130 l/min

      Gear box

      Forward gears number 4 and 3 25 % more or 1

      6 reasons to buy Liebherr L580 2 plus 2:

      Sizes

      Clearance 550 mm and 495 mm 10 % more or 55 mm

      Operation

      Hydraulic system fluid volume 240 l. and 234 l. 2 % more or 6 l.

      Hydraulic system

      Lowering time 3.5 sec and 4.1 sec 15 % less or 0.6 sec
      Lifting time 5.5 sec and 6.1 sec 10 % less or 0.6 sec

      Gear box

      Maximum forward speed 40 km/h and 36.5 km/h 9 % more or 3.5 km/h
      Maximum reverse gear 40 km/h and 25 km/h 37 % more or 15 km/h

      Neutral reasons:

      Sizes

      Height to cab upper part 3865 mm and 3540 mm
      Wheelbase 3700 mm and 3570 mm
      Hinge axis maximum height 4560 mm and 4560 mm
      Length with bucket on ground level 9630 mm and 9000 mm

      Shovel

      Unloading ground clearance at maximum lifting 3300 mm and 3300 mm
      Shovel width 3450 mm and 3300 mm

      Operation

      Working weight 30000 kg and 24740 kg
      Operating voltage 24 V and 24 V
      Rear axle oscillating 26 degrees and 26 degrees
      Tyre size 29.5-25 and 26.5R25
      Front axle / differential fluid volume 58 l. and 58 l.

      Motor

      Cylinders number 6 and 6
      Aspiration turbocharging and Turbocharging with intercooler
      Manufacturer Cummins and Liebherr
      Model QSM11 and D 926 TI-E A2
      Power measured at 2000 rev / min and 2000 rev / min

      Hydraulic system

      Type of pump alternating Axial-piston pump and Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit

      Gear box

      Transmission type powershift transmission and hydrostatic 2+2
      Reverse gears number 3 and 3

      Images

      Sizes

      5. Clearance 495 mm 5. Clearance 550 mm
      6. Hinge axis maximum height 4560 mm 6. Hinge axis maximum height 4560 mm
      8. Radius at maximum lifting and unloading 1430 mm 8. Radius at maximum lifting and unloading 1150 mm
      1. Length with bucket on ground level 9630 mm 1. Length with bucket on ground level 9000 mm
      3. Height to cab upper part 3865 mm 3. Height to cab upper part 3540 mm
      4. Wheelbase 3700 mm 4. Wheelbase 3570 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 3300 mm 7. Unloading ground clearance at maximum lifting 3300 mm