vs.

      JCB 426BHT vs. John Deere 624J High-Lift

      8 reasons to buy JCB 426BHT:

      Operation

      Cooling system fluid volume 50 l. and 27 l. 46 % more or 23 l.
      Rear axle / differential fluid volume 26 l. and 17 l. 35 % more or 9 l.
      Front axle / differential fluid volume 26 l. and 22 l. 15 % more or 4 l.
      Hydraulic system fluid volume 210 l. and 119 l. 43 % more or 91 l.

      Motor

      Power measured at 2200 rev / min and 1800 rev / min 18 % more or 400 rev

      Hydraulic system

      Lifting time 4.8 sec and 5.8 sec 17 % less or 1.0 sec
      Unloading time 1.5 sec and 1.7 sec 12 % less or 0.2 sec

      Gear box

      Maximum reverse gear 26.9 km/h and 25.8 km/h 4 % more or 1.1 km/h

      14 reasons to buy John Deere 624J High-Lift:

      Sizes

      Clearance 430 mm and 375 mm 13 % more or 55 mm

      Shovel

      Breakout power 115.1 kN and 122 kN 6 % less or 6.9 kN
      Unloading ground clearance at maximum lifting 3250 mm and 2876 mm 12 % more or 374 mm
      Bucket capacity with top 2.7 m3 and 1.8 m3 33 % more or 0.9 m3

      Operation

      Generator current strength 80 amperes and 55 amperes 31 % more or 25 amperes
      Fuel Capacity 352 l. and 212 l. 40 % more or 140 l.
      Engine oil volume 21 l. and 14.7 l. 30 % more or 6.3 l.

      Motor

      Effective power 147.6 kW and 98.4 kW 33 % more or 49.2 kW
      Displacement 6.8 l. and 6 l. 12 % more or 0.8 l.
      Torque measured at 1600 rev / min and 1400 rev / min 12 % more or 200 rev
      Maximum torque 837 Nm and 588 Nm 30 % more or 249 Nm

      Hydraulic system

      Lowering time 2.8 sec and 3.4 sec 18 % less or 0.6 sec
      Pump bandwidth 227 l/min and 220 l/min 3 % more or 7 l/min

      Gear box

      Maximum forward speed 39.6 km/h and 37.9 km/h 4 % more or 1.7 km/h

      Neutral reasons:

      Sizes

      Length with bucket on ground level 6540 mm and 8260 mm
      Between tyres width 2403 mm and 2582 mm
      Height to cab upper part 3155 mm and 3330 mm
      Wheelbase 2900 mm and 3020 mm
      Hinge axis maximum height 3839 mm and 4340 mm

      Shovel

      Shovel width 2498 mm and 2590.8 mm

      Operation

      Transmission fluid volume 23 l. and 23 l.
      Operating voltage 24 V and 24 V
      Rear axle oscillating 25 degrees and 24 degrees
      Tyre size 17.5x25x12 layers (L2) and 20.5 R25

      Motor

      Model 1006-60T and 6068H
      Manufacturer Perkins and John Deere
      Cylinders number 6 and 6
      Aspiration turbocharging and Turbocharger with charge air cooler by oncoming air flow

      Hydraulic system

      Type of pump Variable displacement piston pump, with load sensing, axial and variable displacement axial piston pump
      Overflow valve pressure 22145.9 kPa and 25320 kPa

      Gear box

      Transmission type four wheel drive, semi-automatic transmission with power gear shifting and automatic powershift
      Forward gears number 4 and 4
      Reverse gears number 3 and 3

      Images

      Sizes

      4. Wheelbase 2900 mm 4. Wheelbase 3020 mm
      5. Clearance 375 mm 5. Clearance 430 mm
      6. Hinge axis maximum height 3839 mm 6. Hinge axis maximum height 4340 mm
      1. Length with bucket on ground level 6540 mm 1. Length with bucket on ground level 8260 mm
      2. Between tyres width 2403 mm 2. Between tyres width 2582 mm
      3. Height to cab upper part 3155 mm 3. Height to cab upper part 3330 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 2876 mm 7. Unloading ground clearance at maximum lifting 3250 mm