vs.

      JCB 436BHT vs. Liebherr L554 2 plus 2

      9 reasons to buy JCB 436BHT:

      Operation

      Rear axle / differential fluid volume 36 l. and 28 l. 22 % more or 8 l.
      Turn radius 5860 mm and 6360 mm 8 % less or 500 mm

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Torque measured at 1400 rev / min and 1200 rev / min 14 % more or 200 rev
      Cylinders number 6 and 4 33 % more or 2

      Hydraulic system

      Unloading time 1.4 sec and 2.3 sec 39 % less or 0.9 sec
      Lifting time 5 sec and 5.5 sec 9 % less or 0.5 sec
      Pump bandwidth 255 l/min and 230 l/min 10 % more or 25 l/min

      Gear box

      Forward gears number 4 and 3 25 % more or 1

      16 reasons to buy Liebherr L554 2 plus 2:

      Sizes

      Radius at maximum lifting and unloading 1070 mm and 1044 mm 2 % more or 26 mm
      Clearance 530 mm and 459 mm 13 % more or 71 mm

      Shovel

      Breakout power 130 kN and 153 kN 15 % less or 23 kN
      Unloading ground clearance at maximum lifting 3085 mm and 2947 mm 4 % more or 138 mm
      Bucket capacity with top 3.5 m3 and 2.3 m3 34 % more or 1.2 m3

      Operation

      Front axle / differential fluid volume 51 l. and 39 l. 24 % more or 12 l.
      Static tipping weight 13925 kg and 9937 kg 29 % more or 3988 kg
      Fuel Capacity 260 l. and 230 l. 12 % more or 30 l.
      Hydraulic system fluid volume 220 l. and 210 l. 5 % more or 10 l.
      Engine oil volume 20.5 l. and 14.7 l. 28 % more or 5.8 l.

      Motor

      Full power 147.6 kW and 119.3 kW 19 % more or 28.3 kW
      Displacement 6.6 l. and 6 l. 9 % more or 0.6 l.
      Maximum torque 802 Nm and 663 Nm 17 % more or 139 Nm

      Hydraulic system

      Lowering time 2.7 sec and 3.5 sec 23 % less or 0.8 sec

      Gear box

      Maximum forward speed 40 km/h and 38 km/h 5 % more or 2 km/h
      Maximum reverse gear 40 km/h and 24 km/h 40 % more or 16 km/h

      Neutral reasons:

      Sizes

      Hinge axis maximum height 3996 mm and 4180 mm
      Length with bucket on ground level 6770 mm and 8130 mm
      Height to cab upper part 3250 mm and 3355 mm
      Wheelbase 3000 mm and 3150 mm

      Shovel

      Shovel width 2700 mm and 2700 mm

      Operation

      Operating voltage 24 V and 24 V
      Generator current strength 55 amperes and 55 amperes
      Rear axle oscillating 25 degrees and 26 degrees
      Tyre size 20.5x25x12 layers (L2) and 23.5 R 25

      Motor

      Manufacturer Perkins and Liebherr
      Model 1006-60TW and D 924 TI-E A2
      Aspiration turbocharging and Engine with in-line cylinders, water-cooled, with release and exhaust gas turbocharger with intermediate air cooling

      Hydraulic system

      Type of pump Variable displacement piston pump, with load sensing, axial and Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit
      Overflow valve pressure 24993.5 kPa and 33000 kPa

      Gear box

      Transmission type semi-automatic transmission with power gear shifting and Stepless hydrostatic travel drive system 2+2
      Reverse gears number 3 and 3

      Images

      Sizes

      1. Length with bucket on ground level 6770 mm 1. Length with bucket on ground level 8130 mm
      3. Height to cab upper part 3250 mm 3. Height to cab upper part 3355 mm
      4. Wheelbase 3000 mm 4. Wheelbase 3150 mm
      5. Clearance 459 mm 5. Clearance 530 mm
      6. Hinge axis maximum height 3996 mm 6. Hinge axis maximum height 4180 mm
      8. Radius at maximum lifting and unloading 1044 mm 8. Radius at maximum lifting and unloading 1070 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 2947 mm 7. Unloading ground clearance at maximum lifting 3085 mm