vs.

      John Deere 444J Powerllel Input Contacts vs. JCB 426BHT

      9 reasons to buy John Deere 444J Powerllel Input Contacts:

      Sizes

      Radius at maximum lifting and unloading 1140 mm and 986 mm 14 % more or 154 mm
      Clearance 396 mm and 375 mm 5 % more or 21 mm

      Shovel

      Bucket capacity with top 1.9 m3 and 1.8 m3 5 % more or 0.1 m3
      Breakout power 72.2 kN and 122 kN 41 % less or 49.8 kN

      Operation

      Generator current strength 80 amperes and 55 amperes 31 % more or 25 amperes
      Fuel Capacity 246 l. and 212 l. 14 % more or 34 l.
      Engine oil volume 17.5 l. and 14.7 l. 16 % more or 2.8 l.

      Hydraulic system

      Unloading time 1.1 sec and 1.5 sec 27 % less or 0.4 sec
      Lowering time 1.9 sec and 3.4 sec 44 % less or 1.5 sec

      14 reasons to buy JCB 426BHT:

      Shovel

      Unloading ground clearance at maximum lifting 2876 mm and 2680 mm 7 % more or 196 mm

      Operation

      Transmission fluid volume 23 l. and 18.5 l. 20 % more or 4.5 l.
      Front axle / differential fluid volume 26 l. and 22 l. 15 % more or 4 l.
      Rear axle / differential fluid volume 26 l. and 22 l. 15 % more or 4 l.
      Hydraulic system fluid volume 210 l. and 97 l. 54 % more or 113 l.
      Cooling system fluid volume 50 l. and 19 l. 62 % more or 31 l.

      Motor

      Effective power 98.4 kW and 89 kW 10 % more or 9.4 kW
      Displacement 6 l. and 4.5 l. 25 % more or 1.5 l.
      Cylinders number 6 and 4 33 % more or 2
      Maximum torque 588 Nm and 515 Nm 12 % more or 73 Nm

      Hydraulic system

      Pump bandwidth 220 l/min and 140 l/min 36 % more or 80 l/min
      Lifting time 4.8 sec and 5.5 sec 13 % less or 0.7 sec

      Gear box

      Maximum forward speed 37.9 km/h and 37.7 km/h 1 % more or 0.2 km/h
      Maximum reverse gear 26.9 km/h and 25.3 km/h 6 % more or 1.6 km/h

      Neutral reasons:

      Sizes

      Wheelbase 2750 mm and 2900 mm
      Hinge axis maximum height 3660 mm and 3839 mm
      Length with bucket on ground level 6930 mm and 6540 mm
      Height to cab upper part 3.2 mm and 3155 mm

      Shovel

      Shovel width 2539 mm and 2498 mm

      Operation

      Operating voltage 24 V and 24 V
      Rear axle oscillating 24 degrees and 25 degrees
      Tyre size 17.5 R25 and 17.5x25x12 layers (L2)

      Motor

      Model 4045H and 1006-60T
      Manufacturer John Deere and Perkins
      Power measured at 2200 rev / min and 2200 rev / min
      Torque measured at 1400 rev / min and 1400 rev / min
      Aspiration Turbocharger with charge air cooler by oncoming air flow and turbocharging

      Hydraulic system

      Type of pump variable displacement axial piston pump and Variable displacement piston pump, with load sensing, axial
      Overflow valve pressure 24800 kPa and 22145.9 kPa

      Gear box

      Transmission type powershift transmission with camshaft and four wheel drive, semi-automatic transmission with power gear shifting
      Forward gears number 4 and 4
      Reverse gears number 3 and 3

      Images

      Sizes

      3. Height to cab upper part 3.2 mm 3. Height to cab upper part 3155 mm
      4. Wheelbase 2750 mm 4. Wheelbase 2900 mm
      5. Clearance 396 mm 5. Clearance 375 mm
      6. Hinge axis maximum height 3660 mm 6. Hinge axis maximum height 3839 mm
      8. Radius at maximum lifting and unloading 1140 mm 8. Radius at maximum lifting and unloading 986 mm
      1. Length with bucket on ground level 6930 mm 1. Length with bucket on ground level 6540 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 2680 mm 7. Unloading ground clearance at maximum lifting 2876 mm