vs.

      John Deere 524K Z-Bar vs. Liebherr L554 2 plus 2

      9 reasons to buy John Deere 524K Z-Bar:

      Shovel

      Breakout power 90.2 kN and 130 kN 31 % less or 39.8 kN

      Operation

      Fuel Capacity 325 l. and 260 l. 20 % more or 65 l.
      Turn radius 5000 mm and 6360 mm 21 % less or 1360 mm
      Generator current strength 80 amperes and 55 amperes 31 % more or 25 amperes

      Motor

      Displacement 6.8 l. and 6.6 l. 3 % more or 0.2 l.
      Torque measured at 1600 rev / min and 1200 rev / min 25 % more or 400 rev
      Cylinders number 6 and 4 33 % more or 2

      Hydraulic system

      Unloading time 1.4 sec and 2.3 sec 39 % less or 0.9 sec

      Gear box

      Forward gears number 4 and 3 25 % more or 1

      15 reasons to buy Liebherr L554 2 plus 2:

      Sizes

      Clearance 530 mm and 400 mm 25 % more or 130 mm
      Radius at maximum lifting and unloading 1070 mm and 980 mm 8 % more or 90 mm

      Shovel

      Unloading ground clearance at maximum lifting 3085 mm and 2770 mm 10 % more or 315 mm
      Bucket capacity with top 3.5 m3 and 2.1 m3 40 % more or 1.4 m3

      Operation

      Hydraulic system fluid volume 220 l. and 91 l. 59 % more or 129 l.
      Engine oil volume 20.5 l. and 19 l. 7 % more or 1.5 l.
      Front axle / differential fluid volume 51 l. and 17 l. 67 % more or 34 l.
      Rear axle / differential fluid volume 28 l. and 17 l. 39 % more or 11 l.
      Static tipping weight 13925 kg and 10288 kg 26 % more or 3637 kg

      Motor

      Maximum torque 802 Nm and 607.4 Nm 24 % more or 194.6 Nm

      Hydraulic system

      Pump bandwidth 230 l/min and 165 l/min 28 % more or 65 l/min
      Lifting time 5.5 sec and 6.1 sec 10 % less or 0.6 sec
      Lowering time 2.7 sec and 3 sec 10 % less or 0.3 sec

      Gear box

      Maximum forward speed 40 km/h and 36 km/h 10 % more or 4 km/h
      Maximum reverse gear 40 km/h and 24.1 km/h 40 % more or 15.9 km/h

      Neutral reasons:

      Sizes

      Height to cab upper part 3250 mm and 3355 mm
      Wheelbase 2930 mm and 3150 mm
      Hinge axis maximum height 3770 mm and 4180 mm
      Length with bucket on ground level 7340 mm and 8130 mm

      Shovel

      Shovel width 2540 mm and 2700 mm

      Operation

      Working weight 12282 kg and 17300 kg
      Operating voltage 24 V and 24 V
      Rear axle oscillating 24 degrees and 26 degrees
      Tyre size 20.5 R 25 and 23.5 R 25

      Motor

      Aspiration Turbocharger with charge air cooler by oncoming air flow and Engine with in-line cylinders, water-cooled, with release and exhaust gas turbocharger with intermediate air cooling
      Manufacturer John Deere and Liebherr
      Model E 6068H, III Level III certified and D 924 TI-E A2
      Power measured at 2000 rev / min and 2000 rev / min

      Hydraulic system

      Type of pump variable displacement piston pump axial piston and Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit
      Overflow valve pressure 24993.5 kPa and 33000 kPa

      Gear box

      Reverse gears number 3 and 3
      Transmission type Powershift transmission of intermediate type and Stepless hydrostatic travel drive system 2+2

      Images

      Sizes

      1. Length with bucket on ground level 7340 mm 1. Length with bucket on ground level 8130 mm
      3. Height to cab upper part 3250 mm 3. Height to cab upper part 3355 mm
      4. Wheelbase 2930 mm 4. Wheelbase 3150 mm
      5. Clearance 400 mm 5. Clearance 530 mm
      6. Hinge axis maximum height 3770 mm 6. Hinge axis maximum height 4180 mm
      8. Radius at maximum lifting and unloading 980 mm 8. Radius at maximum lifting and unloading 1070 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 2770 mm 7. Unloading ground clearance at maximum lifting 3085 mm