- Home/
- Comparison/
- Wheel-Mounted Loader/
- John Deere 624J High-Lift vs. Terex TXL250-2
John Deere 624J High-Lift vs. Terex TXL250-2
13 reasons to buy John Deere 624J High-Lift:
Sizes
Clearance | 430 mm and 410 mm | 5 % more or 20 mm |
Shovel
Breakout power | 115.1 kN and 129 kN | 11 % less or 13.9 kN |
Unloading ground clearance at maximum lifting | 3250 mm and 2700 mm | 17 % more or 550 mm |
Bucket capacity with top | 2.7 m3 and 2.5 m3 | 7 % more or 0.2 m3 |
Operation
Turn radius | 5181.6 mm and 5477 mm | 5 % less or 295.4 mm |
Generator current strength | 80 amperes and 70 amperes | 12 % more or 10 amperes |
Fuel Capacity | 352 l. and 255 l. | 28 % more or 97 l. |
Motor
Displacement | 6.8 l. and 5.9 l. | 13 % more or 0.9 l. |
Torque measured at | 1600 rev / min and 1400 rev / min | 12 % more or 200 rev |
Maximum torque | 837 Nm and 804 Nm | 4 % more or 33 Nm |
Hydraulic system
Lowering time | 2.8 sec and 3.3 sec | 15 % less or 0.5 sec |
Gear box
Maximum forward speed | 39.6 km/h and 34 km/h | 14 % more or 5.6 km/h |
Maximum reverse gear | 25.8 km/h and 23.5 km/h | 9 % more or 2.3 km/h |
11 reasons to buy Terex TXL250-2:
Operation
Rear axle / differential fluid volume | 24 l. and 17 l. | 29 % more or 7 l. |
Static tipping weight | 12200 kg and 11339 kg | 7 % more or 861 kg |
Hydraulic system fluid volume | 158 l. and 119 l. | 25 % more or 39 l. |
Engine oil volume | 27 l. and 21 l. | 22 % more or 6 l. |
Cooling system fluid volume | 45 l. and 27 l. | 40 % more or 18 l. |
Transmission fluid volume | 45 l. and 23 l. | 49 % more or 22 l. |
Front axle / differential fluid volume | 31 l. and 22 l. | 29 % more or 9 l. |
Motor
Power measured at | 2100 rev / min and 1800 rev / min | 14 % more or 300 rev |
Hydraulic system
Unloading time | 1.3 sec and 1.7 sec | 24 % less or 0.4 sec |
Pump bandwidth | 280.1 l/min and 227 l/min | 19 % more or 53.1 l/min |
Lifting time | 5.4 sec and 5.8 sec | 7 % less or 0.4 sec |
Neutral reasons:
Sizes
Length with bucket on ground level | 8260 mm and 7694 mm |
Between tyres width | 2582 mm and 2608 mm |
Height to cab upper part | 3330 mm and 3260 mm |
Wheelbase | 3020 mm and 3020 mm |
Hinge axis maximum height | 4340 mm and 3856 mm |
Shovel
Shovel width | 2590.8 mm and 2740 mm |
Operation
Operating voltage | 24 V and 24 V |
Rear axle oscillating | 24 degrees and 22 degrees |
Tyre size | 20.5 R25 and 20.5-25-16PR |
Working weight | 15235 kg and 14000.1 kg |
Motor
Model | 6068H and DL06 |
Manufacturer | John Deere and Doosan |
Cylinders number | 6 and 6 |
Aspiration | Turbocharger with charge air cooler by oncoming air flow and turbocharging |
Hydraulic system
Type of pump | variable displacement axial piston pump and vane pump with triple section |
Overflow valve pressure | 25320 kPa and 19601.8 kPa |
Gear box
Transmission type | automatic powershift and powershift transmission |
Forward gears number | 4 and 4 |
Reverse gears number | 3 and 3 |
Images
Sizes
2. Between tyres width | 2582 mm | 2. Between tyres width | 2608 mm |
3. Height to cab upper part | 3330 mm | 3. Height to cab upper part | 3260 mm |
4. Wheelbase | 3020 mm | 4. Wheelbase | 3020 mm |
5. Clearance | 430 mm | 5. Clearance | 410 mm |
6. Hinge axis maximum height | 4340 mm | 6. Hinge axis maximum height | 3856 mm |
1. Length with bucket on ground level | 8260 mm | 1. Length with bucket on ground level | 7694 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 3250 mm | 7. Unloading ground clearance at maximum lifting | 2700 mm |