vs.

      John Deere 624K High-Lift vs. Terex TXL500-2

      10 reasons to buy John Deere 624K High-Lift:

      Shovel

      Breakout power 115.1 kN and 273 kN 58 % less or 157.9 kN
      Unloading ground clearance at maximum lifting 3230 mm and 3120 mm 3 % more or 110 mm

      Operation

      Turn radius 5270 mm and 7370 mm 28 % less or 2100 mm
      Generator current strength 80 amperes and 70 amperes 12 % more or 10 amperes

      Motor

      Torque measured at 1600 rev / min and 1400 rev / min 12 % more or 200 rev

      Hydraulic system

      Lifting time 5.9 sec and 6 sec 2 % less or 0.1 sec
      Unloading time 1.3 sec and 1.8 sec 28 % less or 0.5 sec
      Lowering time 2.7 sec and 4.3 sec 37 % less or 1.6 sec

      Gear box

      Maximum forward speed 39.5 km/h and 35 km/h 11 % more or 4.5 km/h
      Maximum reverse gear 25.7 km/h and 24.4 km/h 5 % more or 1.3 km/h

      15 reasons to buy Terex TXL500-2:

      Sizes

      Clearance 510 mm and 384 mm 25 % more or 126 mm
      Radius at maximum lifting and unloading 1430 mm and 1110 mm 22 % more or 320 mm

      Shovel

      Bucket capacity with top 4.8 m3 and 2.7 m3 44 % more or 2.1 m3

      Operation

      Engine oil volume 34 l. and 19 l. 44 % more or 15 l.
      Cooling system fluid volume 60 l. and 27 l. 55 % more or 33 l.
      Transmission fluid volume 54 l. and 21 l. 61 % more or 33 l.
      Fuel Capacity 476 l. and 352 l. 26 % more or 124 l.
      Front axle / differential fluid volume 50 l. and 22 l. 56 % more or 28 l.
      Hydraulic system fluid volume 236 l. and 110 l. 53 % more or 126 l.
      Rear axle / differential fluid volume 50 l. and 17 l. 66 % more or 33 l.
      Static tipping weight 23000 kg and 11559 kg 50 % more or 11441 kg

      Motor

      Power measured at 1900 rev / min and 1800 rev / min 5 % more or 100 rev
      Displacement 10.8 l. and 6.8 l. 37 % more or 4.0 l.
      Maximum torque 1677.1 Nm and 836.5 Nm 50 % more or 840.6 Nm

      Hydraulic system

      Pump bandwidth 463.7 l/min and 223 l/min 52 % more or 240.7 l/min

      Neutral reasons:

      Sizes

      Wheelbase 3090 mm and 3600 mm
      Hinge axis maximum height 4300 mm and 4584 mm
      Length with bucket on ground level 8170 mm and 9525 mm
      Height to cab upper part 3320 mm and 3820 mm

      Shovel

      Shovel width 2690 mm and 3400 mm

      Operation

      Working weight 15319 kg and 30699.6 kg
      Operating voltage 24 V and 24 V
      Rear axle oscillating 24 degrees and 20 degrees
      Tyre size 20.5 R 25 and 29.5-25-22PR (L3)

      Motor

      Aspiration Turbocharger with charge air cooler by oncoming air flow and turbocharging
      Manufacturer John Deere and Cummins
      Model 6068H, III Level III certified and QSM11
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump variable displacement piston pump axial piston and two variable displacement piston pumps, axial, with load sensing
      Overflow valve pressure 25338.2 kPa and 25000.4 kPa

      Gear box

      Forward gears number 4 and 4
      Reverse gears number 3 and 3
      Transmission type Powershift transmission of intermediate type and powershift transmission

      Images

      Sizes

      1. Length with bucket on ground level 8170 mm 1. Length with bucket on ground level 9525 mm
      3. Height to cab upper part 3320 mm 3. Height to cab upper part 3820 mm
      4. Wheelbase 3090 mm 4. Wheelbase 3600 mm
      5. Clearance 384 mm 5. Clearance 510 mm
      6. Hinge axis maximum height 4300 mm 6. Hinge axis maximum height 4584 mm
      8. Radius at maximum lifting and unloading 1110 mm 8. Radius at maximum lifting and unloading 1430 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 3230 mm 7. Unloading ground clearance at maximum lifting 3120 mm