vs.

      John Deere 724K High-Lift vs. Liebherr L538

      20 reasons to buy John Deere 724K High-Lift:

      Sizes

      Radius at maximum lifting and unloading 1180 mm and 970 mm 18 % more or 210 mm

      Shovel

      Unloading ground clearance at maximum lifting 3330 mm and 2870 mm 14 % more or 460 mm
      Bucket capacity with top 3.2 m3 and 2.5 m3 22 % more or 0.7 m3

      Operation

      Fuel Capacity 352 l. and 160 l. 55 % more or 192 l.
      Static tipping weight 13376 kg and 10160 kg 24 % more or 3216 kg
      Turn radius 5640 mm and 5795 mm 3 % less or 155 mm
      Engine oil volume 28 l. and 20.5 l. 27 % more or 7.5 l.
      Front axle / differential fluid volume 22 l. and 15.5 l. 30 % more or 6.5 l.
      Generator current strength 80 amperes and 55 amperes 31 % more or 25 amperes
      Rear axle / differential fluid volume 22 l. and 15.5 l. 30 % more or 6.5 l.

      Motor

      Displacement 9 l. and 6.6 l. 27 % more or 2.4 l.
      Cylinders number 6 and 4 33 % more or 2
      Maximum torque 1155.2 Nm and 567 Nm 51 % more or 588.2 Nm

      Hydraulic system

      Lowering time 3 sec and 4 sec 25 % less or 1 sec
      Pump bandwidth 310 l/min and 140 l/min 55 % more or 170 l/min
      Lifting time 5.5 sec and 6 sec 8 % less or 0.5 sec
      Unloading time 1.4 sec and 1.6 sec 12 % less or 0.2 sec

      Gear box

      Forward gears number 4 and 2 50 % more or 2
      Reverse gears number 3 and 2 33 % more or 1
      Maximum forward speed 35.6 km/h and 34 km/h 4 % more or 1.6 km/h

      6 reasons to buy Liebherr L538:

      Sizes

      Clearance 460 mm and 400 mm 13 % more or 60 mm

      Shovel

      Breakout power 105 kN and 136.2 kN 23 % less or 31.2 kN

      Operation

      Hydraulic system fluid volume 130 l. and 110 l. 15 % more or 20 l.

      Motor

      Power measured at 2000 rev / min and 1800 rev / min 10 % more or 200 rev
      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev

      Gear box

      Maximum reverse gear 34 km/h and 24.2 km/h 29 % more or 9.8 km/h

      Neutral reasons:

      Sizes

      Height to cab upper part 3380 mm and 3250 mm
      Wheelbase 3260 mm and 2900 mm
      Hinge axis maximum height 4460 mm and 3900 mm
      Length with bucket on ground level 8710 mm and 7135 mm

      Shovel

      Shovel width 3040 mm and 2500 mm

      Operation

      Operating voltage 24 V and 24 V
      Rear axle oscillating 26 degrees and 12 degrees
      Tyre size 23.5 R25 and 20.5 R 25
      Working weight 19270 kg and 12260 kg

      Motor

      Manufacturer John Deere and Liebherr
      Model 6090H, III Level III certified and D 924 TI-E A1
      Aspiration Turbocharger with charge air cooler by oncoming air flow and Engine with in-line cylinders, water-cooled, with release and exhaust gas turbocharger with intermediate air cooling

      Hydraulic system

      Type of pump variable displacement axial piston pump and Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit
      Overflow valve pressure 25165.8 kPa and 30000 kPa

      Gear box

      Transmission type Powershift transmission of intermediate type and Stepless hydrostatic travel drive system

      Images

      Sizes

      4. Wheelbase 3260 mm 4. Wheelbase 2900 mm
      5. Clearance 400 mm 5. Clearance 460 mm
      6. Hinge axis maximum height 4460 mm 6. Hinge axis maximum height 3900 mm
      8. Radius at maximum lifting and unloading 1180 mm 8. Radius at maximum lifting and unloading 970 mm
      1. Length with bucket on ground level 8710 mm 1. Length with bucket on ground level 7135 mm
      3. Height to cab upper part 3380 mm 3. Height to cab upper part 3250 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 3330 mm 7. Unloading ground clearance at maximum lifting 2870 mm