vs.

      John Deere 724K High-Lift vs. Liebherr L542 2 plus 1

      14 reasons to buy John Deere 724K High-Lift:

      Shovel

      Unloading ground clearance at maximum lifting 3330 mm and 2845 mm 15 % more or 485 mm
      Bucket capacity with top 3.2 m3 and 2.7 m3 16 % more or 0.5 m3

      Operation

      Fuel Capacity 352 l. and 170 l. 52 % more or 182 l.
      Front axle / differential fluid volume 22 l. and 16.3 l. 26 % more or 5.7 l.
      Rear axle / differential fluid volume 22 l. and 15 l. 32 % more or 7 l.
      Static tipping weight 13376 kg and 11040 kg 17 % more or 2336 kg

      Motor

      Maximum torque 1155.2 Nm and 770 Nm 33 % more or 385.2 Nm
      Displacement 9 l. and 6.4 l. 29 % more or 2.6 l.
      Cylinders number 6 and 4 33 % more or 2

      Hydraulic system

      Pump bandwidth 310 l/min and 140 l/min 55 % more or 170 l/min
      Lifting time 5.5 sec and 5.9 sec 7 % less or 0.4 sec
      Unloading time 1.4 sec and 1.6 sec 12 % less or 0.2 sec
      Lowering time 3 sec and 4 sec 25 % less or 1 sec

      Gear box

      Forward gears number 4 and 3 25 % more or 1

      7 reasons to buy Liebherr L542 2 plus 1:

      Sizes

      Clearance 490 mm and 400 mm 18 % more or 90 mm

      Shovel

      Breakout power 105 kN and 136.2 kN 23 % less or 31.2 kN

      Operation

      Hydraulic system fluid volume 180 l. and 110 l. 39 % more or 70 l.
      Engine oil volume 29 l. and 28 l. 3 % more or 1 l.

      Motor

      Power measured at 2000 rev / min and 1800 rev / min 10 % more or 200 rev

      Gear box

      Maximum forward speed 40 km/h and 35.6 km/h 11 % more or 4.4 km/h
      Maximum reverse gear 40 km/h and 24.2 km/h 39 % more or 15.8 km/h

      Neutral reasons:

      Sizes

      Length with bucket on ground level 8710 mm and 7225 mm
      Height to cab upper part 3380 mm and 3250 mm
      Wheelbase 3260 mm and 2975 mm
      Hinge axis maximum height 4460 mm and 3930 mm

      Shovel

      Shovel width 3040 mm and 2500 mm

      Operation

      Tyre size 23.5 R25 and 20.5R25
      Working weight 19270 kg and 13040.8 kg
      Operating voltage 24 V and 24 V
      Generator current strength 80 amperes and 80 amperes
      Rear axle oscillating 26 degrees and 12 degrees

      Motor

      Torque measured at 1300 rev / min and 1300 rev / min
      Aspiration Turbocharger with charge air cooler by oncoming air flow and turbocharging
      Manufacturer John Deere and Liebherr
      Model 6090H, III Level III certified and D 934 S AG

      Hydraulic system

      Type of pump variable displacement axial piston pump and Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit
      Overflow valve pressure 25165.8 kPa and 33000 kPa

      Gear box

      Transmission type Powershift transmission of intermediate type and hydrostatic
      Reverse gears number 3 and 3

      Images

      Sizes

      1. Length with bucket on ground level 8710 mm 1. Length with bucket on ground level 7225 mm
      3. Height to cab upper part 3380 mm 3. Height to cab upper part 3250 mm
      4. Wheelbase 3260 mm 4. Wheelbase 2975 mm
      5. Clearance 400 mm 5. Clearance 490 mm
      6. Hinge axis maximum height 4460 mm 6. Hinge axis maximum height 3930 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 3330 mm 7. Unloading ground clearance at maximum lifting 2845 mm