- Home/
- Comparison/
- Wheel-Mounted Loader/
- John Deere 724K Z-Bar vs. Zettelmeyer ZL502B
John Deere 724K Z-Bar vs. Zettelmeyer ZL502B
19 reasons to buy John Deere 724K Z-Bar:
Sizes
Radius at maximum lifting and unloading | 1130 mm and 790 mm | 30 % more or 340 mm |
Shovel
Unloading ground clearance at maximum lifting | 2790 mm and 2500 mm | 10 % more or 290 mm |
Operation
Hydraulic system fluid volume | 110 l. and 60 l. | 45 % more or 50 l. |
Engine oil volume | 28 l. and 10.5 l. | 62 % more or 17.5 l. |
Front axle / differential fluid volume | 22 l. and 10 l. | 55 % more or 12 l. |
Rear axle / differential fluid volume | 22 l. and 11 l. | 50 % more or 11 l. |
Static tipping weight | 16489 kg and 3120.7 kg | 81 % more or 13368.3 kg |
Fuel Capacity | 352 l. and 60 l. | 83 % more or 292 l. |
Generator current strength | 80 amperes and 60 amperes | 25 % more or 20 amperes |
Motor
Maximum torque | 1155.2 Nm and 129 Nm | 89 % more or 1026.2 Nm |
Effective power | 196.9 kW and 35 kW | 82 % more or 161.9 kW |
Displacement | 9 l. and 2.7 l. | 70 % more or 6.3 l. |
Cylinders number | 6 and 4 | 33 % more or 2 |
Hydraulic system
Pump bandwidth | 310 l/min and 45 l/min | 85 % more or 265 l/min |
Lifting time | 5.5 sec and 6 sec | 8 % less or 0.5 sec |
Gear box
Forward gears number | 4 and 2 | 50 % more or 2 |
Reverse gears number | 3 and 2 | 33 % more or 1 |
Maximum forward speed | 35.6 km/h and 20 km/h | 44 % more or 15.6 km/h |
Maximum reverse gear | 24.2 km/h and 20 km/h | 17 % more or 4.2 km/h |
6 reasons to buy Zettelmeyer ZL502B:
Sizes
Clearance | 450 mm and 410 mm | 9 % more or 40 mm |
Shovel
Breakout power | 38.5 kN and 141.2 kN | 73 % less or 102.7 kN |
Operation
Turn radius | 4065 mm and 5640 mm | 28 % less or 1575 mm |
Motor
Power measured at | 2800 rev / min and 1800 rev / min | 36 % more or 1000 rev |
Torque measured at | 1800 rev / min and 1300 rev / min | 28 % more or 500 rev |
Hydraulic system
Unloading time | 1 sec and 1.2 sec | 17 % less or 0.2 sec |
Neutral reasons:
Sizes
Height to cab upper part | 3380 mm and 2585 mm |
Length with bucket on ground level | 8340 mm and 4990 mm |
Wheelbase | 3260 mm and 2000 mm |
Between tyres width | 2880 mm and 1730 mm |
Hinge axis maximum height | 4070 mm and 3090 mm |
Shovel
Shovel width | 3040 mm and 1750 mm |
Operation
Tyre size | 23.5 R25 and 12.5-18 |
Working weight | 19130 kg and 4195.7 kg |
Operating voltage | 24 V and 12 V |
Rear axle oscillating | 26 degrees and 20 degrees |
Motor
Aspiration | Turbocharger with charge air cooler by oncoming air flow and natural aspiration |
Model | 6090H, III Level III certified and KHD F4L 1011 F |
Hydraulic system
Lowering time | 3 sec and 3 sec |
Overflow valve pressure | 25165.8 kPa and 22001.2 kPa |
Gear box
Transmission type | Powershift transmission of intermediate type and hydrostatic powershift transmission |
Images
Sizes
6. Hinge axis maximum height | 4070 mm | 6. Hinge axis maximum height | 3090 mm |
8. Radius at maximum lifting and unloading | 1130 mm | 8. Radius at maximum lifting and unloading | 790 mm |
1. Length with bucket on ground level | 8340 mm | 1. Length with bucket on ground level | 4990 mm |
2. Between tyres width | 2880 mm | 2. Between tyres width | 1730 mm |
3. Height to cab upper part | 3380 mm | 3. Height to cab upper part | 2585 mm |
4. Wheelbase | 3260 mm | 4. Wheelbase | 2000 mm |
5. Clearance | 410 mm | 5. Clearance | 450 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 2790 mm | 7. Unloading ground clearance at maximum lifting | 2500 mm |