vs.

      John Deere 744H vs. Case 321D

      23 reasons to buy John Deere 744H:

      Sizes

      Clearance 465 mm and 365 mm 22 % more or 100 mm
      Radius at maximum lifting and unloading 1270 mm and 889 mm 30 % more or 381 mm

      Shovel

      Bucket capacity with top 4 m3 and 1.1 m3 72 % more or 2.9 m3
      Unloading ground clearance at maximum lifting 3042 mm and 2659 mm 13 % more or 383 mm

      Operation

      Static tipping weight 17190 kg and 4307 kg 75 % more or 12883 kg
      Fuel Capacity 432 l. and 100 l. 77 % more or 332 l.
      Hydraulic system fluid volume 144 l. and 70 l. 51 % more or 74 l.
      Engine oil volume 38 l. and 7.5 l. 80 % more or 30.5 l.
      Cooling system fluid volume 43 l. and 13 l. 70 % more or 30 l.
      Front axle / differential fluid volume 46 l. and 3.7 l. 92 % more or 42.3 l.
      Rear axle / differential fluid volume 46 l. and 3.7 l. 92 % more or 42.3 l.

      Motor

      Displacement 12.5 l. and 3.1 l. 75 % more or 9.4 l.
      Full power 211 kW and 55.9 kW 74 % more or 155.1 kW
      Cylinders number 6 and 4 33 % more or 2
      Maximum torque 1280 Nm and 214.2 Nm 83 % more or 1065.8 Nm
      Torque increase 45 % and 9 % 80 % more or 36 %
      Effective power 194 kW and 53.7 kW 72 % more or 140.3 kW

      Hydraulic system

      Pump bandwidth 393 l/min and 71.9 l/min 82 % more or 321.1 l/min
      Lowering time 3 sec and 3.5 sec 14 % less or 0.5 sec

      Gear box

      Forward gears number 4 and 2 50 % more or 2
      Reverse gears number 3 and 2 33 % more or 1
      Maximum forward speed 39.5 km/h and 20 km/h 49 % more or 19.5 km/h
      Maximum reverse gear 31 km/h and 20 km/h 35 % more or 11 km/h

      4 reasons to buy Case 321D:

      Shovel

      Breakout power 70.8 kN and 168.2 kN 58 % less or 97.4 kN

      Motor

      Power measured at 2300 rev / min and 2000 rev / min 13 % more or 300 rev
      Torque measured at 1600 rev / min and 1500 rev / min 6 % more or 100 rev

      Hydraulic system

      Unloading time 1.1 sec and 1.5 sec 27 % less or 0.4 sec

      Neutral reasons:

      Sizes

      Length with bucket on ground level 8586 mm and 5531 mm
      Between tyres width 2940 mm and 1978 mm
      Height to cab upper part 3520 mm and 2785 mm
      Wheelbase 3400 mm and 2350 mm
      Hinge axis maximum height 4281 mm and 3344 mm

      Shovel

      Shovel width 3040 mm and 2100 mm

      Operation

      Rear axle oscillating 26 degrees and 24 degrees
      Tyre size 26.5-25 and 405/70 R20
      Operating voltage 24 V and 12 V
      Generator current strength 55 amperes and 55 amperes
      Working weight 22815 kg and 5909.4 kg

      Motor

      Manufacturer John Deere and Deutz
      Model 6125A and BF4M2011

      Hydraulic system

      Type of pump piston pump and Open-centered with pressure/flow compensation
      Overflow valve pressure 22000 kPa and 159.7 kPa
      Lifting time 6.6 sec and 6.6 sec

      Gear box

      Transmission type powershift and hydrostatic

      Images

      Sizes

      2. Between tyres width 2940 mm 2. Between tyres width 1978 mm
      3. Height to cab upper part 3520 mm 3. Height to cab upper part 2785 mm
      4. Wheelbase 3400 mm 4. Wheelbase 2350 mm
      5. Clearance 465 mm 5. Clearance 365 mm
      6. Hinge axis maximum height 4281 mm 6. Hinge axis maximum height 3344 mm
      8. Radius at maximum lifting and unloading 1270 mm 8. Radius at maximum lifting and unloading 889 mm
      1. Length with bucket on ground level 8586 mm 1. Length with bucket on ground level 5531 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 3042 mm 7. Unloading ground clearance at maximum lifting 2659 mm