vs.

      John Deere 744J Waste Pickup Loader vs. Terex TXL500-2

      9 reasons to buy John Deere 744J Waste Pickup Loader:

      Shovel

      Breakout power 145.4 kN and 273 kN 47 % less or 127.6 kN

      Operation

      Turn radius 6140 mm and 7370 mm 17 % less or 1230 mm
      Generator current strength 80 amperes and 70 amperes 12 % more or 10 amperes
      Engine oil volume 38 l. and 34 l. 11 % more or 4 l.

      Motor

      Power measured at 2000 rev / min and 1900 rev / min 5 % more or 100 rev
      Displacement 12.6 l. and 10.8 l. 14 % more or 1.8 l.

      Hydraulic system

      Unloading time 1.5 sec and 1.8 sec 17 % less or 0.3 sec
      Lowering time 3 sec and 4.3 sec 30 % less or 1.3 sec

      Gear box

      Maximum reverse gear 31.1 km/h and 24.4 km/h 22 % more or 6.7 km/h

      16 reasons to buy Terex TXL500-2:

      Sizes

      Radius at maximum lifting and unloading 1430 mm and 1199 mm 16 % more or 231 mm

      Shovel

      Unloading ground clearance at maximum lifting 3120 mm and 2780 mm 11 % more or 340 mm
      Bucket capacity with top 4.8 m3 and 4.7 m3 2 % more or 0.1 m3

      Operation

      Fuel Capacity 476 l. and 462 l. 3 % more or 14 l.
      Hydraulic system fluid volume 236 l. and 144 l. 39 % more or 92 l.
      Cooling system fluid volume 60 l. and 38 l. 37 % more or 22 l.
      Transmission fluid volume 54 l. and 28 l. 48 % more or 26 l.
      Front axle / differential fluid volume 50 l. and 49 l. 2 % more or 1 l.
      Rear axle / differential fluid volume 50 l. and 49 l. 2 % more or 1 l.
      Static tipping weight 23000 kg and 21364 kg 7 % more or 1636 kg

      Motor

      Torque measured at 1400 rev / min and 1100 rev / min 21 % more or 300 rev
      Maximum torque 1677.1 Nm and 1315 Nm 22 % more or 362.1 Nm

      Hydraulic system

      Pump bandwidth 463.7 l/min and 394 l/min 15 % more or 69.7 l/min
      Lifting time 6 sec and 6.5 sec 8 % less or 0.5 sec

      Gear box

      Forward gears number 4 and 3 25 % more or 1
      Maximum forward speed 35 km/h and 21.1 km/h 40 % more or 13.9 km/h

      Neutral reasons:

      Sizes

      Height to cab upper part 3560 mm and 3820 mm
      Clearance 510 mm and 510 mm
      Length with bucket on ground level 8495 mm and 9525 mm
      Wheelbase 3400 mm and 3600 mm
      Hinge axis maximum height 4320 mm and 4584 mm

      Shovel

      Shovel width 3251 mm and 3400 mm

      Operation

      Working weight 29977 kg and 30699.6 kg
      Operating voltage 24 V and 24 V
      Rear axle oscillating 16 degrees and 20 degrees
      Tyre size 31.5 - 25 and 29.5-25-22PR (L3)

      Motor

      Aspiration Turbocharger with charge air cooler by oncoming air flow and turbocharging
      Cylinders number 6 and 6
      Manufacturer John Deere and Cummins
      Model 6125H and QSM11

      Hydraulic system

      Type of pump variable displacement axial piston pump and two variable displacement piston pumps, axial, with load sensing
      Overflow valve pressure 22050 kPa and 25000.4 kPa

      Gear box

      Reverse gears number 3 and 3
      Transmission type automatic transmission system with power gear shifting and powershift transmission

      Images

      Sizes

      6. Hinge axis maximum height 4320 mm 6. Hinge axis maximum height 4584 mm
      8. Radius at maximum lifting and unloading 1199 mm 8. Radius at maximum lifting and unloading 1430 mm
      1. Length with bucket on ground level 8495 mm 1. Length with bucket on ground level 9525 mm
      3. Height to cab upper part 3560 mm 3. Height to cab upper part 3820 mm
      4. Wheelbase 3400 mm 4. Wheelbase 3600 mm
      5. Clearance 510 mm 5. Clearance 510 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 2780 mm 7. Unloading ground clearance at maximum lifting 3120 mm