- Home/
- Comparison/
- Wheel-Mounted Loader/
- Kawasaki 115ZV vs. Case 521D
Kawasaki 115ZV vs. Case 521D
19 reasons to buy Kawasaki 115ZV:
Sizes
Clearance | 550 mm and 377 mm | 31 % more or 173 mm |
Radius at maximum lifting and unloading | 1690 mm and 1056 mm | 38 % more or 634 mm |
Shovel
Unloading ground clearance at maximum lifting | 3660 mm and 2757 mm | 25 % more or 903 mm |
Bucket capacity with top | 6.6 m3 and 1.9 m3 | 71 % more or 4.7 m3 |
Brimmed bucket capacity | 5.8 m3 and 1.6 m3 | 72 % more or 4.2 m3 |
Operation
Static tipping weight | 30490 kg and 8357 kg | 73 % more or 22133 kg |
Engine oil volume | 66 l. and 12.5 l. | 81 % more or 53.5 l. |
Cooling system fluid volume | 122 l. and 22 l. | 82 % more or 100 l. |
Transmission fluid volume | 85 l. and 18.9 l. | 78 % more or 66.1 l. |
Generator current strength | 75 amperes and 70 amperes | 7 % more or 5 amperes |
Front axle / differential fluid volume | 180 l. and 22 l. | 88 % more or 158 l. |
Rear axle / differential fluid volume | 180 l. and 22 l. | 88 % more or 158 l. |
Fuel Capacity | 670 l. and 189 l. | 72 % more or 481 l. |
Hydraulic system fluid volume | 475 l. and 113.6 l. | 76 % more or 361.4 l. |
Motor
Displacement | 18.8 l. and 4.5 l. | 76 % more or 14.3 l. |
Maximum torque | 1879.2 Nm and 455 Nm | 76 % more or 1424.2 Nm |
Cylinders number | 6 and 4 | 33 % more or 2 |
Effective power | 357.9 kW and 82 kW | 77 % more or 275.9 kW |
Hydraulic system
Pump bandwidth | 182.1 l/min and 134 l/min | 26 % more or 48.1 l/min |
7 reasons to buy Case 521D:
Operation
Turn radius | 4947 mm and 8230 mm | 40 % less or 3283 mm |
Motor
Torque measured at | 1400 rev / min and 1300 rev / min | 7 % more or 100 rev |
Hydraulic system
Lowering time | 3.7 sec and 4.7 sec | 21 % less or 1.0 sec |
Lifting time | 5.6 sec and 8.4 sec | 33 % less or 2.8 sec |
Unloading time | 1.1 sec and 2.1 sec | 48 % less or 1.0 sec |
Gear box
Maximum forward speed | 37.6 km/h and 35.1 km/h | 7 % more or 2.5 km/h |
Maximum reverse gear | 24.5 km/h and 22.7 km/h | 7 % more or 1.8 km/h |
Neutral reasons:
Sizes
Height to cab upper part | 4170 mm and 3173 mm |
Wheelbase | 4050 mm and 2750 mm |
Hinge axis maximum height | 5040 mm and 3603 mm |
Length with bucket on ground level | 10780 mm and 6707 mm |
Between tyres width | 3570 mm and 2308 mm |
Shovel
Shovel width | 3770 mm and 2468 mm |
Operation
Operating voltage | 24 V and 24 V |
Rear axle oscillating | 26 degrees and 24 degrees |
Tyre size | 35/65-33-24PR (L-4) and 17.5x25 |
Working weight | 44650 kg and 10028 kg |
Motor
Power measured at | 2000 rev / min and 2000 rev / min |
Manufacturer | Cummins and Case |
Model | QSK19 and Family III 445TA/M2, 2 level |
Aspiration | Turbocharging with intercooler and Turbocharging with subsequent air cooling (by a cooling radiator) |
Hydraulic system
Type of pump | gear type pump and in the middle position with locking with pressure / flow compensation |
Overflow valve pressure | 20684.3 kPa and 18961 kPa |
Gear box
Transmission type | powershift transmission and 4 forward / 3 reverse gears proportional with electronic control module |
Forward gears number | 4 and 4 |
Reverse gears number | 3 and 3 |
Images
Sizes
6. Hinge axis maximum height | 5040 mm | 6. Hinge axis maximum height | 3603 mm |
8. Radius at maximum lifting and unloading | 1690 mm | 8. Radius at maximum lifting and unloading | 1056 mm |
1. Length with bucket on ground level | 10780 mm | 1. Length with bucket on ground level | 6707 mm |
2. Between tyres width | 3570 mm | 2. Between tyres width | 2308 mm |
3. Height to cab upper part | 4170 mm | 3. Height to cab upper part | 3173 mm |
4. Wheelbase | 4050 mm | 4. Wheelbase | 2750 mm |
5. Clearance | 550 mm | 5. Clearance | 377 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 3660 mm | 7. Unloading ground clearance at maximum lifting | 2757 mm |