- Home/
- Comparison/
- Wheel-Mounted Loader/
- Komatsu WA250PT-5 vs. John Deere 624H Waste Pickup Loader
Komatsu WA250PT-5 vs. John Deere 624H Waste Pickup Loader
9 reasons to buy Komatsu WA250PT-5:
Sizes
| Clearance | 460 mm and 457 mm | 1 % more or 3 mm |
| Radius at maximum lifting and unloading | 1085 mm and 917 mm | 15 % more or 168 mm |
Shovel
| Breakout power | 121 kN and 13747 kN | 99 % less or 13626 kN |
Operation
| Generator current strength | 60 amperes and 55 amperes | 8 % more or 5 amperes |
Hydraulic system
| Lowering time | 1.7 sec and 3 sec | 43 % less or 1.3 sec |
Gear box
| Forward gears number | 4 and 3 | 25 % more or 1 |
| Reverse gears number | 4 and 3 | 25 % more or 1 |
| Maximum forward speed | 38 km/h and 24.1 km/h | 37 % more or 13.9 km/h |
| Maximum reverse gear | 38 km/h and 25.8 km/h | 32 % more or 12.2 km/h |
20 reasons to buy John Deere 624H Waste Pickup Loader:
Shovel
| Brimmed bucket capacity | 2.4 m3 and 1.6 m3 | 33 % more or 0.8 m3 |
| Unloading ground clearance at maximum lifting | 3399 mm and 2885 mm | 15 % more or 514 mm |
| Bucket capacity with top | 3.1 m3 and 2 m3 | 35 % more or 1.1 m3 |
Operation
| Turn radius | 5187 mm and 5240 mm | 1 % less or 53 mm |
| Engine oil volume | 20 l. and 19.5 l. | 2 % more or 0.5 l. |
| Cooling system fluid volume | 22 l. and 17.5 l. | 20 % more or 4.5 l. |
| Transmission fluid volume | 27 l. and 6.9 l. | 74 % more or 20.1 l. |
| Front axle / differential fluid volume | 28 l. and 18 l. | 36 % more or 10 l. |
| Rear axle / differential fluid volume | 20 l. and 18 l. | 10 % more or 2 l. |
| Static tipping weight | 10821 kg and 10468 kg | 3 % more or 353 kg |
| Fuel Capacity | 265 l. and 181 l. | 32 % more or 84 l. |
| Hydraulic system fluid volume | 117 l. and 67 l. | 43 % more or 50 l. |
Motor
| Full power | 128 kW and 103.7 kW | 19 % more or 24.3 kW |
| Power measured at | 2200 rev / min and 2000 rev / min | 9 % more or 200 rev |
| Displacement | 6.8 l. and 5.9 l. | 13 % more or 0.9 l. |
| Effective power | 119 kW and 99.9 kW | 16 % more or 19.1 kW |
| Maximum torque | 720 Nm and 618 Nm | 14 % more or 102 Nm |
Hydraulic system
| Pump bandwidth | 200 l/min and 163 l/min | 18 % more or 37 l/min |
| Lifting time | 5.8 sec and 6.3 sec | 8 % less or 0.5 sec |
| Unloading time | 1.4 sec and 3.3 sec | 58 % less or 1.9 sec |
Neutral reasons:
Sizes
| Length with bucket on ground level | 7275 mm and 7682 mm |
| Between tyres width | 2470 mm and 2572 mm |
| Height to cab upper part | 3240 mm and 3351 mm |
| Wheelbase | 2900 mm and 3030 mm |
| Hinge axis maximum height | 3960 mm and 4379 mm |
Shovel
| Shovel width | 2550 mm and 3251 mm |
Operation
| Operating voltage | 24 V and 24 V |
| Rear axle oscillating | 30 degrees and 18 degrees |
| Tyre size | 20.5 R 25 and 20.5-25 |
| Working weight | 12800 kg and 17623 kg |
Motor
| Manufacturer | Komatsu and John Deere |
| Torque measured at | 1400 rev / min and 1400 rev / min |
| Model | SAA6 D102 E and 6068H |
| Cylinders number | 6 and 6 |
| Aspiration | turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator) |
Hydraulic system
| Type of pump | gear type pump and piston pump |
| Overflow valve pressure | 21000 kPa and 24850 kPa |
Gear box
| Transmission type | Electronically controlled hydrostatic transmission and powershift |
Images
Sizes
| 1. Length with bucket on ground level | 7275 mm | 1. Length with bucket on ground level | 7682 mm |
| 2. Between tyres width | 2470 mm | 2. Between tyres width | 2572 mm |
| 3. Height to cab upper part | 3240 mm | 3. Height to cab upper part | 3351 mm |
| 4. Wheelbase | 2900 mm | 4. Wheelbase | 3030 mm |
| 5. Clearance | 460 mm | 5. Clearance | 457 mm |
| 6. Hinge axis maximum height | 3960 mm | 6. Hinge axis maximum height | 4379 mm |
| 8. Radius at maximum lifting and unloading | 1085 mm | 8. Radius at maximum lifting and unloading | 917 mm |
Shovel
| 7. Unloading ground clearance at maximum lifting | 2885 mm | 7. Unloading ground clearance at maximum lifting | 3399 mm |