- Home/
- Comparison/
- Wheel-Mounted Loader/
- Komatsu WA470-5 vs. Liebherr L542 2 plus 1
Komatsu WA470-5 vs. Liebherr L542 2 plus 1
20 reasons to buy Komatsu WA470-5:
Sizes
| Clearance | 525 mm and 490 mm | 7 % more or 35 mm |
Shovel
| Unloading ground clearance at maximum lifting | 3100 mm and 2845 mm | 8 % more or 255 mm |
| Bucket capacity with top | 4.1 m3 and 2.7 m3 | 34 % more or 1.4 m3 |
Operation
| Fuel Capacity | 390 l. and 170 l. | 56 % more or 220 l. |
| Hydraulic system fluid volume | 186 l. and 180 l. | 3 % more or 6 l. |
| Engine oil volume | 38 l. and 29 l. | 24 % more or 9 l. |
| Front axle / differential fluid volume | 52 l. and 16.3 l. | 69 % more or 35.7 l. |
| Rear axle / differential fluid volume | 52 l. and 15 l. | 71 % more or 37 l. |
| Static tipping weight | 18905 kg and 11040 kg | 42 % more or 7865 kg |
Motor
| Cylinders number | 6 and 4 | 33 % more or 2 |
| Maximum torque | 1245 Nm and 770 Nm | 38 % more or 475 Nm |
| Full power | 202.1 kW and 105 kW | 48 % more or 97.1 kW |
| Displacement | 11 l. and 6.4 l. | 42 % more or 4.6 l. |
| Torque measured at | 1400 rev / min and 1300 rev / min | 7 % more or 100 rev |
Hydraulic system
| Pump bandwidth | 410 l/min and 140 l/min | 66 % more or 270 l/min |
| Unloading time | 1.4 sec and 1.6 sec | 12 % less or 0.2 sec |
| Lowering time | 3.7 sec and 4 sec | 7 % less or 0.3 sec |
Gear box
| Reverse gears number | 4 and 3 | 25 % more or 1 |
| Forward gears number | 4 and 3 | 25 % more or 1 |
| Maximum reverse gear | 40.9 km/h and 40 km/h | 2 % more or 0.9 km/h |
4 reasons to buy Liebherr L542 2 plus 1:
Shovel
| Breakout power | 105 kN and 184 kN | 43 % less or 79 kN |
Operation
| Generator current strength | 80 amperes and 50 amperes | 37 % more or 30 amperes |
Hydraulic system
| Lifting time | 5.9 sec and 6 sec | 2 % less or 0.1 sec |
Gear box
| Maximum forward speed | 40 km/h and 39.7 km/h | 1 % more or 0.3 km/h |
Neutral reasons:
Sizes
| Wheelbase | 3450 mm and 2975 mm |
| Height to cab upper part | 3460 mm and 3250 mm |
| Hinge axis maximum height | 4340 mm and 3930 mm |
| Length with bucket on ground level | 8890 mm and 7225 mm |
Shovel
| Shovel width | 2990 mm and 2500 mm |
Operation
| Working weight | 22780 kg and 13040.8 kg |
| Operating voltage | 24 V and 24 V |
| Rear axle oscillating | 30 degrees and 12 degrees |
| Tyre size | 26.5 R25 and 20.5R25 |
Motor
| Aspiration | turbocharging and turbocharging |
| Manufacturer | Komatsu and Liebherr |
| Model | SAA6D125E-3 and D 934 S AG |
| Power measured at | 2000 rev / min and 2000 rev / min |
Hydraulic system
| Type of pump | gear type pump and Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit |
| Overflow valve pressure | 21000 kPa and 33000 kPa |
Gear box
| Transmission type | automatic transmission system with power gear shifting and hydrostatic |
Images
Sizes
| 1. Length with bucket on ground level | 8890 mm | 1. Length with bucket on ground level | 7225 mm |
| 3. Height to cab upper part | 3460 mm | 3. Height to cab upper part | 3250 mm |
| 4. Wheelbase | 3450 mm | 4. Wheelbase | 2975 mm |
| 5. Clearance | 525 mm | 5. Clearance | 490 mm |
| 6. Hinge axis maximum height | 4340 mm | 6. Hinge axis maximum height | 3930 mm |
Shovel
| 7. Unloading ground clearance at maximum lifting | 3100 mm | 7. Unloading ground clearance at maximum lifting | 2845 mm |