- Home/
- Comparison/
- Wheel-Mounted Loader/
- Komatsu WA75-3 vs. Terex TXL300-2
Komatsu WA75-3 vs. Terex TXL300-2
9 reasons to buy Komatsu WA75-3:
Shovel
Breakout power | 48.6 kN and 162 kN | 70 % less or 113.4 kN |
Unloading ground clearance at maximum lifting | 2565 mm and 1285 mm | 50 % more or 1280 mm |
Operation
Turn radius | 3770 mm and 5800 mm | 35 % less or 2030 mm |
Generator current strength | 80 amperes and 70 amperes | 12 % more or 10 amperes |
Motor
Power measured at | 2500 rev / min and 2000 rev / min | 20 % more or 500 rev |
Torque measured at | 1600 rev / min and 1300 rev / min | 19 % more or 300 rev |
Hydraulic system
Lifting time | 4.9 sec and 5.9 sec | 17 % less or 1.0 sec |
Unloading time | 1 sec and 1.9 sec | 47 % less or 0.9 sec |
Lowering time | 2.6 sec and 3.7 sec | 30 % less or 1.1 sec |
16 reasons to buy Terex TXL300-2:
Sizes
Radius at maximum lifting and unloading | 1285 mm and 890 mm | 31 % more or 395 mm |
Clearance | 470 mm and 460 mm | 2 % more or 10 mm |
Operation
Fuel Capacity | 330 l. and 90 l. | 73 % more or 240 l. |
Hydraulic system fluid volume | 210 l. and 95 l. | 55 % more or 115 l. |
Engine oil volume | 35 l. and 9.4 l. | 73 % more or 25.6 l. |
Cooling system fluid volume | 50 l. and 12.3 l. | 75 % more or 37.7 l. |
Front axle / differential fluid volume | 38 l. and 6.1 l. | 84 % more or 31.9 l. |
Rear axle / differential fluid volume | 30 l. and 6.5 l. | 78 % more or 23.5 l. |
Static tipping weight | 14500 kg and 3750 kg | 74 % more or 10750 kg |
Motor
Displacement | 7.6 l. and 3.3 l. | 57 % more or 4.3 l. |
Cylinders number | 6 and 4 | 33 % more or 2 |
Maximum torque | 1029.1 Nm and 210 Nm | 80 % more or 819.1 Nm |
Hydraulic system
Pump bandwidth | 280.1 l/min and 64.1 l/min | 77 % more or 216.0 l/min |
Gear box
Maximum forward speed | 34.5 km/h and 20 km/h | 42 % more or 14.5 km/h |
Forward gears number | 4 and 2 | 50 % more or 2 |
Reverse gears number | 3 and 2 | 33 % more or 1 |
Neutral reasons:
Sizes
Wheelbase | 2000 mm and 3200 mm |
Hinge axis maximum height | 3205 mm and 4000 mm |
Length with bucket on ground level | 5390 mm and 8150 mm |
Height to cab upper part | 2650 mm and 3438 mm |
Shovel
Shovel width | 1950 mm and 2920 mm |
Operation
Operating voltage | 12 V and 24 V |
Rear axle oscillating | 24 degrees and 24 degrees |
Tyre size | 405/70 R18 SPT 9 and 23.5-25-16PR-L3 |
Working weight | 4850 kg and 17300 kg |
Motor
Manufacturer | Komatsu and Doosan |
Model | 4D 98E and DL08 |
Hydraulic system
Type of pump | Closed Hydraulic Circuit and pumps with twin vanes |
Overflow valve pressure | 20500 kPa and 19994.8 kPa |
Gear box
Transmission type | hydrostatic and powershift transmission |
Images
Sizes
3. Height to cab upper part | 2650 mm | 3. Height to cab upper part | 3438 mm |
4. Wheelbase | 2000 mm | 4. Wheelbase | 3200 mm |
5. Clearance | 460 mm | 5. Clearance | 470 mm |
6. Hinge axis maximum height | 3205 mm | 6. Hinge axis maximum height | 4000 mm |
8. Radius at maximum lifting and unloading | 890 mm | 8. Radius at maximum lifting and unloading | 1285 mm |
1. Length with bucket on ground level | 5390 mm | 1. Length with bucket on ground level | 8150 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 2565 mm | 7. Unloading ground clearance at maximum lifting | 1285 mm |