vs.

      Liebherr L524 vs. Kawasaki 85ZII

      4 reasons to buy Liebherr L524:

      Shovel

      Breakout power 92 kN and 164.9 kN 44 % less or 72.9 kN

      Operation

      Turn radius 5500 mm and 7150 mm 23 % less or 1650 mm

      Motor

      Power measured at 2400 rev / min and 2100 rev / min 12 % more or 300 rev

      Gear box

      Maximum reverse gear 33 km/h and 15.6 km/h 53 % more or 17.4 km/h

      20 reasons to buy Kawasaki 85ZII:

      Sizes

      Clearance 540 mm and 520 mm 4 % more or 20 mm
      Radius at maximum lifting and unloading 1010 mm and 870 mm 14 % more or 140 mm

      Shovel

      Bucket capacity with top 3.3 m3 and 2 m3 39 % more or 1.3 m3
      Unloading ground clearance at maximum lifting 2940 mm and 2850 mm 3 % more or 90 mm

      Operation

      Fuel Capacity 290 l. and 160 l. 45 % more or 130 l.
      Hydraulic system fluid volume 254 l. and 130 l. 49 % more or 124 l.
      Engine oil volume 37 l. and 12 l. 68 % more or 25 l.
      Front axle / differential fluid volume 55 l. and 12.2 l. 78 % more or 42.8 l.
      Rear axle / differential fluid volume 55 l. and 12.7 l. 77 % more or 42.3 l.
      Static tipping weight 13594.2 kg and 8030 kg 41 % more or 5564.2 kg
      Generator current strength 75 amperes and 55 amperes 27 % more or 20 amperes

      Motor

      Displacement 10 l. and 4.5 l. 55 % more or 5.5 l.
      Cylinders number 6 and 4 33 % more or 2
      Full power 168.5 kW and 82 kW 51 % more or 86.5 kW

      Hydraulic system

      Pump bandwidth 210.8 l/min and 105 l/min 50 % more or 105.8 l/min
      Lifting time 6.3 sec and 6.5 sec 3 % less or 0.2 sec
      Unloading time 1.2 sec and 2 sec 40 % less or 0.8 sec
      Lowering time 4 sec and 5 sec 20 % less or 1 sec

      Gear box

      Forward gears number 4 and 2 50 % more or 2
      Maximum forward speed 36.2 km/h and 33 km/h 9 % more or 3.2 km/h

      Neutral reasons:

      Sizes

      Length with bucket on ground level 6835 mm and 7635 mm
      Height to cab upper part 3150 mm and 3625 mm
      Wheelbase 2700 mm and 3200 mm
      Hinge axis maximum height 3760 mm and 4102.6 mm

      Shovel

      Shovel width 2500 mm and 2953 mm

      Operation

      Rear axle oscillating 12 degrees and 30 degrees
      Tyre size 17.5 R 25 and 23.5-25-16PR (L-2)
      Working weight 10100 kg and 19900 kg
      Operating voltage 24 V and 24 V

      Motor

      Aspiration Engine with in-line cylinders, water cooling, turbocharging and turbocharging
      Manufacturer Liebherr and Cummins
      Model D 504 T and LT-10-C250

      Hydraulic system

      Type of pump Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit and gear type pump
      Overflow valve pressure 30000 kPa and 18133.2 kPa

      Gear box

      Transmission type Stepless hydrostatic travel drive system and powershift transmission
      Reverse gears number 2 and 2

      Images

      Sizes

      6. Hinge axis maximum height 3760 mm 6. Hinge axis maximum height 4102.6 mm
      8. Radius at maximum lifting and unloading 870 mm 8. Radius at maximum lifting and unloading 1010 mm
      1. Length with bucket on ground level 6835 mm 1. Length with bucket on ground level 7635 mm
      3. Height to cab upper part 3150 mm 3. Height to cab upper part 3625 mm
      4. Wheelbase 2700 mm 4. Wheelbase 3200 mm
      5. Clearance 520 mm 5. Clearance 540 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 2850 mm 7. Unloading ground clearance at maximum lifting 2940 mm