vs.

      Liebherr L528 2 plus 1 vs. Zettelmeyer ZL1002Si

      15 reasons to buy Liebherr L528 2 plus 1:

      Shovel

      Bucket capacity with top 2.2 m3 and 1.2 m3 45 % more or 1.0 m3
      Unloading ground clearance at maximum lifting 3530 mm and 2715 mm 23 % more or 815 mm

      Operation

      Fuel Capacity 170 l. and 100 l. 41 % more or 70 l.
      Hydraulic system fluid volume 170 l. and 110 l. 35 % more or 60 l.
      Front axle / differential fluid volume 16.3 l. and 12.5 l. 23 % more or 3.8 l.
      Rear axle / differential fluid volume 15 l. and 13.3 l. 11 % more or 1.7 l.
      Static tipping weight 9180 kg and 5300 kg 42 % more or 3880 kg

      Motor

      Power measured at 2400 rev / min and 2100 rev / min 12 % more or 300 rev
      Full power 86 kW and 68.6 kW 20 % more or 17.4 kW
      Torque measured at 1500 rev / min and 1400 rev / min 7 % more or 100 rev
      Maximum torque 430 Nm and 392 Nm 9 % more or 38 Nm

      Hydraulic system

      Lowering time 4 sec and 5 sec 20 % less or 1 sec

      Gear box

      Reverse gears number 3 and 2 33 % more or 1
      Maximum forward speed 40 km/h and 33 km/h 17 % more or 7 km/h
      Maximum reverse gear 40 km/h and 20 km/h 50 % more or 20 km/h

      6 reasons to buy Zettelmeyer ZL1002Si:

      Sizes

      Clearance 590 mm and 460 mm 22 % more or 130 mm

      Shovel

      Breakout power 64.5 kN and 80 kN 19 % less or 15.5 kN

      Motor

      Displacement 4.8 l. and 4.5 l. 6 % more or 0.3 l.

      Hydraulic system

      Pump bandwidth 106 l/min and 105 l/min 1 % more or 1 l/min
      Lifting time 6 sec and 6.6 sec 9 % less or 0.6 sec
      Unloading time 1.5 sec and 1.8 sec 17 % less or 0.3 sec

      Neutral reasons:

      Sizes

      Length with bucket on ground level 6930 mm and 5780 mm
      Height to cab upper part 3200 mm and 2860 mm
      Wheelbase 2850 mm and 2400 mm
      Hinge axis maximum height 3775 mm and 3470 mm

      Shovel

      Shovel width 2500 mm and 2250 mm

      Operation

      Rear axle oscillating 12 degrees and 20 degrees
      Operating voltage 24 V and 24 V
      Tyre size 17.5R25 and 15.5-25
      Generator current strength 55 amperes and 55 amperes
      Working weight 10784.2 kg and 7600 kg
      Engine oil volume 12 l. and 12 l.

      Motor

      Model D 504 Tl and KHD BF 4M 1013 E
      Cylinders number 4 and 4
      Aspiration turbocharging and turbo + water cooling

      Hydraulic system

      Type of pump Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit and axial piston
      Overflow valve pressure 31500 kPa and 23000 kPa

      Gear box

      Transmission type hydrostatic and hydrostatic powershift transmission
      Forward gears number 3 and 3

      Images

      Sizes

      3. Height to cab upper part 3200 mm 3. Height to cab upper part 2860 mm
      4. Wheelbase 2850 mm 4. Wheelbase 2400 mm
      5. Clearance 460 mm 5. Clearance 590 mm
      6. Hinge axis maximum height 3775 mm 6. Hinge axis maximum height 3470 mm
      1. Length with bucket on ground level 6930 mm 1. Length with bucket on ground level 5780 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 3530 mm 7. Unloading ground clearance at maximum lifting 2715 mm