vs.

      Liebherr L538 vs. John Deere 724K High-Lift

      6 reasons to buy Liebherr L538:

      Sizes

      Clearance 460 mm and 400 mm 13 % more or 60 mm

      Shovel

      Breakout power 105 kN and 136.2 kN 23 % less or 31.2 kN

      Operation

      Hydraulic system fluid volume 130 l. and 110 l. 15 % more or 20 l.

      Motor

      Power measured at 2000 rev / min and 1800 rev / min 10 % more or 200 rev
      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev

      Gear box

      Maximum reverse gear 34 km/h and 24.2 km/h 29 % more or 9.8 km/h

      20 reasons to buy John Deere 724K High-Lift:

      Sizes

      Radius at maximum lifting and unloading 1180 mm and 970 mm 18 % more or 210 mm

      Shovel

      Unloading ground clearance at maximum lifting 3330 mm and 2870 mm 14 % more or 460 mm
      Bucket capacity with top 3.2 m3 and 2.5 m3 22 % more or 0.7 m3

      Operation

      Front axle / differential fluid volume 22 l. and 15.5 l. 30 % more or 6.5 l.
      Rear axle / differential fluid volume 22 l. and 15.5 l. 30 % more or 6.5 l.
      Static tipping weight 13376 kg and 10160 kg 24 % more or 3216 kg
      Fuel Capacity 352 l. and 160 l. 55 % more or 192 l.
      Turn radius 5640 mm and 5795 mm 3 % less or 155 mm
      Engine oil volume 28 l. and 20.5 l. 27 % more or 7.5 l.
      Generator current strength 80 amperes and 55 amperes 31 % more or 25 amperes

      Motor

      Displacement 9 l. and 6.6 l. 27 % more or 2.4 l.
      Cylinders number 6 and 4 33 % more or 2
      Maximum torque 1155.2 Nm and 567 Nm 51 % more or 588.2 Nm

      Hydraulic system

      Lifting time 5.5 sec and 6 sec 8 % less or 0.5 sec
      Unloading time 1.4 sec and 1.6 sec 12 % less or 0.2 sec
      Lowering time 3 sec and 4 sec 25 % less or 1 sec
      Pump bandwidth 310 l/min and 140 l/min 55 % more or 170 l/min

      Gear box

      Maximum forward speed 35.6 km/h and 34 km/h 4 % more or 1.6 km/h
      Forward gears number 4 and 2 50 % more or 2
      Reverse gears number 3 and 2 33 % more or 1

      Neutral reasons:

      Sizes

      Height to cab upper part 3250 mm and 3380 mm
      Wheelbase 2900 mm and 3260 mm
      Hinge axis maximum height 3900 mm and 4460 mm
      Length with bucket on ground level 7135 mm and 8710 mm

      Shovel

      Shovel width 2500 mm and 3040 mm

      Operation

      Working weight 12260 kg and 19270 kg
      Operating voltage 24 V and 24 V
      Rear axle oscillating 12 degrees and 26 degrees
      Tyre size 20.5 R 25 and 23.5 R25

      Motor

      Aspiration Engine with in-line cylinders, water-cooled, with release and exhaust gas turbocharger with intermediate air cooling and Turbocharger with charge air cooler by oncoming air flow
      Manufacturer Liebherr and John Deere
      Model D 924 TI-E A1 and 6090H, III Level III certified

      Hydraulic system

      Type of pump Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit and variable displacement axial piston pump
      Overflow valve pressure 30000 kPa and 25165.8 kPa

      Gear box

      Transmission type Stepless hydrostatic travel drive system and Powershift transmission of intermediate type

      Images

      Sizes

      1. Length with bucket on ground level 7135 mm 1. Length with bucket on ground level 8710 mm
      3. Height to cab upper part 3250 mm 3. Height to cab upper part 3380 mm
      4. Wheelbase 2900 mm 4. Wheelbase 3260 mm
      5. Clearance 460 mm 5. Clearance 400 mm
      6. Hinge axis maximum height 3900 mm 6. Hinge axis maximum height 4460 mm
      8. Radius at maximum lifting and unloading 970 mm 8. Radius at maximum lifting and unloading 1180 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 2870 mm 7. Unloading ground clearance at maximum lifting 3330 mm