vs.

      Liebherr L538 vs. Zettelmeyer ZL602SL

      14 reasons to buy Liebherr L538:

      Sizes

      Radius at maximum lifting and unloading 970 mm and 710 mm 27 % more or 260 mm

      Shovel

      Unloading ground clearance at maximum lifting 2870 mm and 2470 mm 14 % more or 400 mm

      Operation

      Fuel Capacity 160 l. and 60 l. 62 % more or 100 l.
      Hydraulic system fluid volume 130 l. and 60 l. 54 % more or 70 l.
      Engine oil volume 20.5 l. and 10.5 l. 49 % more or 10.0 l.
      Front axle / differential fluid volume 15.5 l. and 10 l. 35 % more or 5.5 l.
      Rear axle / differential fluid volume 15.5 l. and 11 l. 29 % more or 4.5 l.
      Static tipping weight 10160 kg and 3510 kg 65 % more or 6650 kg

      Motor

      Maximum torque 567 Nm and 192.5 Nm 66 % more or 374.5 Nm
      Full power 101.4 kW and 42.5 kW 58 % more or 58.9 kW
      Displacement 6.6 l. and 2.7 l. 59 % more or 3.9 l.

      Hydraulic system

      Pump bandwidth 140 l/min and 50 l/min 64 % more or 90 l/min

      Gear box

      Maximum forward speed 34 km/h and 30 km/h 12 % more or 4 km/h
      Maximum reverse gear 34 km/h and 30 km/h 12 % more or 4 km/h

      8 reasons to buy Zettelmeyer ZL602SL:

      Sizes

      Clearance 480 mm and 460 mm 4 % more or 20 mm

      Shovel

      Breakout power 40.5 kN and 105 kN 61 % less or 64.5 kN

      Operation

      Turn radius 4090 mm and 5795 mm 29 % less or 1705 mm
      Generator current strength 60 amperes and 55 amperes 8 % more or 5 amperes

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Torque measured at 1550 rev / min and 1400 rev / min 10 % more or 150 rev

      Hydraulic system

      Unloading time 1 sec and 1.6 sec 37 % less or 0.6 sec
      Lowering time 3 sec and 4 sec 25 % less or 1 sec

      Neutral reasons:

      Sizes

      Wheelbase 2900 mm and 2000 mm
      Hinge axis maximum height 3900 mm and 3120 mm
      Length with bucket on ground level 7135 mm and 5150 mm
      Height to cab upper part 3250 mm and 2615 mm

      Shovel

      Shovel width 2500 mm and 1750 mm

      Operation

      Working weight 12260 kg and 4599.9 kg
      Operating voltage 24 V and 12 V
      Rear axle oscillating 12 degrees and 20 degrees
      Tyre size 20.5 R 25 and 12.5-20

      Motor

      Aspiration Engine with in-line cylinders, water-cooled, with release and exhaust gas turbocharger with intermediate air cooling and turbocharging
      Model D 924 TI-E A1 and KHD BF4 L 1011T
      Cylinders number 4 and 4

      Hydraulic system

      Type of pump Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit and gear type pump
      Overflow valve pressure 30000 kPa and 22001.2 kPa
      Lifting time 6 sec and 6 sec

      Gear box

      Reverse gears number 2 and 2
      Transmission type Stepless hydrostatic travel drive system and hydrostatic powershift transmission
      Forward gears number 2 and 2

      Images

      Sizes

      8. Radius at maximum lifting and unloading 970 mm 8. Radius at maximum lifting and unloading 710 mm
      1. Length with bucket on ground level 7135 mm 1. Length with bucket on ground level 5150 mm
      3. Height to cab upper part 3250 mm 3. Height to cab upper part 2615 mm
      4. Wheelbase 2900 mm 4. Wheelbase 2000 mm
      5. Clearance 460 mm 5. Clearance 480 mm
      6. Hinge axis maximum height 3900 mm 6. Hinge axis maximum height 3120 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 2870 mm 7. Unloading ground clearance at maximum lifting 2470 mm