vs.

      Liebherr L554 2 plus 2 vs. Hitachi LX230-3

      10 reasons to buy Liebherr L554 2 plus 2:

      Sizes

      Clearance 530 mm and 465 mm 12 % more or 65 mm

      Shovel

      Unloading ground clearance at maximum lifting 3085 mm and 3042 mm 1 % more or 43 mm
      Breakout power 130 kN and 187.5 kN 31 % less or 57.5 kN

      Operation

      Front axle / differential fluid volume 51 l. and 46 l. 10 % more or 5 l.
      Turn radius 6360 mm and 6825 mm 7 % less or 465 mm
      Hydraulic system fluid volume 220 l. and 144 l. 35 % more or 76 l.

      Hydraulic system

      Lifting time 5.5 sec and 6.6 sec 17 % less or 1.1 sec
      Lowering time 2.7 sec and 3 sec 10 % less or 0.3 sec

      Gear box

      Maximum forward speed 40 km/h and 39.5 km/h 1 % more or 0.5 km/h
      Maximum reverse gear 40 km/h and 21.2 km/h 47 % more or 18.8 km/h

      14 reasons to buy Hitachi LX230-3:

      Sizes

      Radius at maximum lifting and unloading 1270 mm and 1070 mm 16 % more or 200 mm

      Shovel

      Bucket capacity with top 4 m3 and 3.5 m3 12 % more or 0.5 m3

      Operation

      Rear axle / differential fluid volume 46 l. and 28 l. 39 % more or 18 l.
      Static tipping weight 17193.4 kg and 13925 kg 19 % more or 3268.4 kg
      Fuel Capacity 432 l. and 260 l. 40 % more or 172 l.
      Engine oil volume 38 l. and 20.5 l. 46 % more or 17.5 l.

      Motor

      Full power 211 kW and 147.6 kW 30 % more or 63.4 kW
      Displacement 12.6 l. and 6.6 l. 48 % more or 6.0 l.
      Torque measured at 1500 rev / min and 1200 rev / min 20 % more or 300 rev
      Cylinders number 6 and 4 33 % more or 2
      Maximum torque 1280 Nm and 802 Nm 37 % more or 478 Nm

      Hydraulic system

      Unloading time 1.5 sec and 2.3 sec 35 % less or 0.8 sec
      Pump bandwidth 393 l/min and 230 l/min 41 % more or 163 l/min

      Gear box

      Forward gears number 4 and 3 25 % more or 1

      Neutral reasons:

      Sizes

      Hinge axis maximum height 4180 mm and 4281 mm
      Length with bucket on ground level 8130 mm and 8586 mm
      Height to cab upper part 3355 mm and 3520 mm
      Wheelbase 3150 mm and 3400 mm

      Shovel

      Shovel width 2700 mm and 3040 mm

      Operation

      Operating voltage 24 V and 24 V
      Generator current strength 55 amperes and 55 amperes
      Rear axle oscillating 26 degrees and 26 degrees
      Tyre size 23.5 R 25 and 26.5-25
      Working weight 17300 kg and 22815.7 kg

      Motor

      Model D 924 TI-E A2 and 6125A
      Power measured at 2000 rev / min and 2000 rev / min
      Aspiration Engine with in-line cylinders, water-cooled, with release and exhaust gas turbocharger with intermediate air cooling and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer Liebherr and John Deere

      Hydraulic system

      Type of pump Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit and piston pump
      Overflow valve pressure 33000 kPa and 22063.2 kPa

      Gear box

      Transmission type Stepless hydrostatic travel drive system 2+2 and powershift
      Reverse gears number 3 and 3

      Images

      Sizes

      3. Height to cab upper part 3355 mm 3. Height to cab upper part 3520 mm
      4. Wheelbase 3150 mm 4. Wheelbase 3400 mm
      5. Clearance 530 mm 5. Clearance 465 mm
      6. Hinge axis maximum height 4180 mm 6. Hinge axis maximum height 4281 mm
      8. Radius at maximum lifting and unloading 1070 mm 8. Radius at maximum lifting and unloading 1270 mm
      1. Length with bucket on ground level 8130 mm 1. Length with bucket on ground level 8586 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 3085 mm 7. Unloading ground clearance at maximum lifting 3042 mm