vs.

      Liebherr L566 2 plus 2 vs. John Deere 744H

      12 reasons to buy Liebherr L566 2 plus 2:

      Sizes

      Clearance 565 mm and 465 mm 18 % more or 100 mm

      Shovel

      Unloading ground clearance at maximum lifting 3240 mm and 3042 mm 6 % more or 198 mm

      Operation

      Hydraulic system fluid volume 260 l. and 144 l. 45 % more or 116 l.
      Engine oil volume 43 l. and 38 l. 12 % more or 5 l.
      Cooling system fluid volume 52 l. and 43 l. 17 % more or 9 l.
      Front axle / differential fluid volume 51 l. and 46 l. 10 % more or 5 l.
      Rear axle / differential fluid volume 51 l. and 46 l. 10 % more or 5 l.
      Static tipping weight 17690 kg and 17190 kg 3 % more or 500 kg
      Generator current strength 80 amperes and 55 amperes 31 % more or 25 amperes

      Hydraulic system

      Lifting time 5.5 sec and 6.6 sec 17 % less or 1.1 sec

      Gear box

      Maximum forward speed 40 km/h and 39.5 km/h 1 % more or 0.5 km/h
      Maximum reverse gear 40 km/h and 31 km/h 22 % more or 9 km/h

      9 reasons to buy John Deere 744H:

      Shovel

      Breakout power 168.2 kN and 200 kN 16 % less or 31.8 kN

      Operation

      Fuel Capacity 432 l. and 400 l. 7 % more or 32 l.

      Motor

      Full power 211 kW and 190 kW 10 % more or 21 kW
      Maximum torque 1280 Nm and 1230 Nm 4 % more or 50 Nm
      Displacement 12.5 l. and 10.5 l. 16 % more or 2.0 l.

      Hydraulic system

      Pump bandwidth 393 l/min and 290 l/min 26 % more or 103 l/min
      Unloading time 1.5 sec and 2 sec 25 % less or 0.5 sec
      Lowering time 3 sec and 3.5 sec 14 % less or 0.5 sec

      Gear box

      Forward gears number 4 and 3 25 % more or 1

      Neutral reasons:

      Sizes

      Height to cab upper part 3550 mm and 3520 mm
      Length with bucket on ground level 8912 mm and 8586 mm
      Wheelbase 3580 mm and 3400 mm
      Hinge axis maximum height 4360 mm and 4281 mm

      Shovel

      Shovel width 3000 mm and 3040 mm
      Bucket capacity with top 4 m3 and 4 m3

      Operation

      Tyre size 26.5R25 and 26.5-25
      Working weight 22500 kg and 22815 kg
      Operating voltage 24 V and 24 V
      Rear axle oscillating 26 degrees and 26 degrees

      Motor

      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer Liebherr and John Deere
      Model D 936 L A6 and 6125A

      Hydraulic system

      Type of pump Axial cam pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit and piston pump
      Overflow valve pressure 35000 kPa and 22000 kPa

      Gear box

      Transmission type hydrostatic and powershift
      Reverse gears number 3 and 3

      Images

      Sizes

      1. Length with bucket on ground level 8912 mm 1. Length with bucket on ground level 8586 mm
      3. Height to cab upper part 3550 mm 3. Height to cab upper part 3520 mm
      4. Wheelbase 3580 mm 4. Wheelbase 3400 mm
      5. Clearance 565 mm 5. Clearance 465 mm
      6. Hinge axis maximum height 4360 mm 6. Hinge axis maximum height 4281 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 3240 mm 7. Unloading ground clearance at maximum lifting 3042 mm