- Home/
- Comparison/
- Wheel-Mounted Loader/
- Liebherr L574 2 plus 2 vs. Komatsu WA50-6
Liebherr L574 2 plus 2 vs. Komatsu WA50-6
19 reasons to buy Liebherr L574 2 plus 2:
Sizes
Clearance | 550 mm and 310 mm | 44 % more or 240 mm |
Radius at maximum lifting and unloading | 1270 mm and 900 mm | 29 % more or 370 mm |
Shovel
Unloading ground clearance at maximum lifting | 3300 mm and 2475 mm | 25 % more or 825 mm |
Operation
Generator current strength | 55 amperes and 40 amperes | 27 % more or 15 amperes |
Fuel Capacity | 330 l. and 50 l. | 85 % more or 280 l. |
Hydraulic system fluid volume | 240 l. and 42 l. | 82 % more or 198 l. |
Engine oil volume | 23.5 l. and 7.5 l. | 68 % more or 16.0 l. |
Front axle / differential fluid volume | 51 l. and 4.8 l. | 91 % more or 46.2 l. |
Rear axle / differential fluid volume | 51 l. and 4.5 l. | 91 % more or 46.5 l. |
Static tipping weight | 18350 kg and 2580 kg | 86 % more or 15770 kg |
Motor
Displacement | 10 l. and 2.2 l. | 78 % more or 7.8 l. |
Cylinders number | 6 and 4 | 33 % more or 2 |
Full power | 197.6 kW and 29.7 kW | 85 % more or 167.9 kW |
Hydraulic system
Pump bandwidth | 290 l/min and 46.5 l/min | 84 % more or 243.5 l/min |
Lifting time | 5.6 sec and 5.7 sec | 2 % less or 0.1 sec |
Gear box
Forward gears number | 3 and 1 | 67 % more or 2 |
Reverse gears number | 3 and 1 | 67 % more or 2 |
Maximum forward speed | 40 km/h and 15 km/h | 62 % more or 25 km/h |
Maximum reverse gear | 40 km/h and 15 km/h | 62 % more or 25 km/h |
3 reasons to buy Komatsu WA50-6:
Operation
Turn radius | 3825 mm and 7090 mm | 46 % less or 3265 mm |
Motor
Power measured at | 2400 rev / min and 2000 rev / min | 17 % more or 400 rev |
Hydraulic system
Unloading time | 1 sec and 2 sec | 50 % less or 1 sec |
Neutral reasons:
Sizes
Length with bucket on ground level | 8980 mm and 4580 mm |
Height to cab upper part | 3540 mm and 2540 mm |
Wheelbase | 3450 mm and 1900 mm |
Hinge axis maximum height | 4565 mm and 3120 mm |
Shovel
Shovel width | 3000 mm and 1690 mm |
Operation
Tyre size | 26.5 R 25 and 15.5/60-18 |
Operating voltage | 24 V and 12 V |
Rear axle oscillating | 26 degrees and 14 degrees |
Working weight | 24250 kg and 3825 kg |
Motor
Manufacturer | Liebherr and Komatsu |
Model | D 926 TI-E A2 and 4D88E-6B |
Hydraulic system
Overflow valve pressure | 35000 kPa and 20684.3 kPa |
Lowering time | 3.5 sec and 3.5 sec |
Gear box
Transmission type | Stepless hydrostatic travel drive system 2+2 and Hydro-Static Transmission |
Images
Sizes
1. Length with bucket on ground level | 8980 mm | 1. Length with bucket on ground level | 4580 mm |
3. Height to cab upper part | 3540 mm | 3. Height to cab upper part | 2540 mm |
4. Wheelbase | 3450 mm | 4. Wheelbase | 1900 mm |
5. Clearance | 550 mm | 5. Clearance | 310 mm |
6. Hinge axis maximum height | 4565 mm | 6. Hinge axis maximum height | 3120 mm |
8. Radius at maximum lifting and unloading | 1270 mm | 8. Radius at maximum lifting and unloading | 900 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 3300 mm | 7. Unloading ground clearance at maximum lifting | 2475 mm |