- Home/
- Comparison/
- Wheel-Mounted Loader/
- Michigan L140 vs. John Deere 324H
Michigan L140 vs. John Deere 324H
25 reasons to buy Michigan L140:
Sizes
Clearance | 432 mm and 355 mm | 18 % more or 77 mm |
Radius at maximum lifting and unloading | 1041 mm and 825 mm | 21 % more or 216 mm |
Shovel
Unloading ground clearance at maximum lifting | 2985 mm and 2746 mm | 8 % more or 239 mm |
Bucket capacity with top | 3.1 m3 and 1.3 m3 | 58 % more or 1.8 m3 |
Brimmed bucket capacity | 2.6 m3 and 1.1 m3 | 58 % more or 1.5 m3 |
Operation
Generator current strength | 100 amperes and 65 amperes | 35 % more or 35 amperes |
Fuel Capacity | 344 l. and 140 l. | 59 % more or 204 l. |
Hydraulic system fluid volume | 329 l. and 65 l. | 80 % more or 264 l. |
Engine oil volume | 34.1 l. and 12 l. | 65 % more or 22.1 l. |
Cooling system fluid volume | 56.8 l. and 15 l. | 74 % more or 41.8 l. |
Front axle / differential fluid volume | 32.2 l. and 9.5 l. | 70 % more or 22.7 l. |
Rear axle / differential fluid volume | 32.2 l. and 9.5 l. | 70 % more or 22.7 l. |
Static tipping weight | 14996 kg and 4806 kg | 68 % more or 10190 kg |
Motor
Cylinders number | 6 and 4 | 33 % more or 2 |
Full power | 167.8 kW and 62 kW | 63 % more or 105.8 kW |
Displacement | 10 l. and 4.5 l. | 55 % more or 5.5 l. |
Torque measured at | 1300 rev / min and 1200 rev / min | 8 % more or 100 rev |
Maximum torque | 1016.9 Nm and 302 Nm | 70 % more or 714.9 Nm |
Effective power | 151.4 kW and 59 kW | 61 % more or 92.4 kW |
Hydraulic system
Pump bandwidth | 117.3 l/min and 115 l/min | 2 % more or 2.3 l/min |
Lowering time | 2 sec and 3.3 sec | 39 % less or 1.3 sec |
Gear box
Forward gears number | 4 and 2 | 50 % more or 2 |
Reverse gears number | 4 and 2 | 50 % more or 2 |
Maximum forward speed | 32 km/h and 28 km/h | 12 % more or 4 km/h |
Maximum reverse gear | 32 km/h and 28 km/h | 12 % more or 4 km/h |
5 reasons to buy John Deere 324H:
Shovel
Breakout power | 79 kN and 191.7 kN | 59 % less or 112.7 kN |
Operation
Turn radius | 3790 mm and 7442 mm | 49 % less or 3652 mm |
Motor
Power measured at | 2400 rev / min and 2000 rev / min | 17 % more or 400 rev |
Hydraulic system
Lifting time | 4.3 sec and 7.5 sec | 43 % less or 3.2 sec |
Unloading time | 1.4 sec and 1.5 sec | 7 % less or 0.1 sec |
Neutral reasons:
Sizes
Length with bucket on ground level | 8280 mm and 6040 mm |
Between tyres width | 2870 mm and 2110 mm |
Wheelbase | 3251 mm and 2500 mm |
Height to cab upper part | 3531 mm and 3025 mm |
Hinge axis maximum height | 4039 mm and 3343 mm |
Shovel
Shovel width | 3150 mm and 2400 mm |
Operation
Operating voltage | 24 V and 12 V |
Working weight | 19150.7 kg and 7039.8 kg |
Rear axle oscillating | 18.5 degrees and 24 degrees |
Tyre size | 23.5-25 (16PR) L-3 and 15.5-25 |
Motor
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and natural aspiration |
Manufacturer | Cummins and John Deere |
Model | LT-10-225 HT and 4045DF |
Hydraulic system
Type of pump | gear type pump and gear type pump |
Overflow valve pressure | 18960.6 kPa and 21000 kPa |
Gear box
Transmission type | Clark R32425-6 and Hydro-Static Transmission |
Images
Sizes
6. Hinge axis maximum height | 4039 mm | 6. Hinge axis maximum height | 3343 mm |
8. Radius at maximum lifting and unloading | 1041 mm | 8. Radius at maximum lifting and unloading | 825 mm |
1. Length with bucket on ground level | 8280 mm | 1. Length with bucket on ground level | 6040 mm |
2. Between tyres width | 2870 mm | 2. Between tyres width | 2110 mm |
3. Height to cab upper part | 3531 mm | 3. Height to cab upper part | 3025 mm |
4. Wheelbase | 3251 mm | 4. Wheelbase | 2500 mm |
5. Clearance | 432 mm | 5. Clearance | 355 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 2985 mm | 7. Unloading ground clearance at maximum lifting | 2746 mm |