- Home/
- Comparison/
- Wheel-Mounted Loader/
- Michigan L270 vs. John Deere 744K High-Lift
Michigan L270 vs. John Deere 744K High-Lift
22 reasons to buy Michigan L270:
Sizes
Clearance | 559 mm and 460 mm | 18 % more or 99 mm |
Radius at maximum lifting and unloading | 1702 mm and 1380 mm | 19 % more or 322 mm |
Shovel
Bucket capacity with top | 5.4 m3 and 4 m3 | 26 % more or 1.4 m3 |
Brimmed bucket capacity | 4.5 m3 and 3.4 m3 | 24 % more or 1.1 m3 |
Unloading ground clearance at maximum lifting | 3734 mm and 3610 mm | 3 % more or 124 mm |
Operation
Generator current strength | 100 amperes and 80 amperes | 20 % more or 20 amperes |
Hydraulic system fluid volume | 454.2 l. and 159 l. | 65 % more or 295.2 l. |
Engine oil volume | 41.6 l. and 34 l. | 18 % more or 7.6 l. |
Cooling system fluid volume | 98.4 l. and 45 l. | 54 % more or 53.4 l. |
Transmission fluid volume | 72 l. and 27.9 l. | 61 % more or 44.1 l. |
Front axle / differential fluid volume | 60.5 l. and 46 l. | 24 % more or 14.5 l. |
Rear axle / differential fluid volume | 60.5 l. and 46 l. | 24 % more or 14.5 l. |
Static tipping weight | 25710 kg and 15778 kg | 39 % more or 9932 kg |
Fuel Capacity | 711.6 l. and 469 l. | 34 % more or 242.6 l. |
Motor
Displacement | 18.8 l. and 9 l. | 52 % more or 9.8 l. |
Torque measured at | 1500 rev / min and 1400 rev / min | 7 % more or 100 rev |
Maximum torque | 1830 Nm and 1456.1 Nm | 20 % more or 373.9 Nm |
Effective power | 268.5 kW and 226.7 kW | 16 % more or 41.8 kW |
Power measured at | 2100 rev / min and 1500 rev / min | 29 % more or 600 rev |
Hydraulic system
Pump bandwidth | 677.6 l/min and 515 l/min | 24 % more or 162.6 l/min |
Gear box
Maximum reverse gear | 34.6 km/h and 30.2 km/h | 13 % more or 4.4 km/h |
Reverse gears number | 4 and 3 | 25 % more or 1 |
6 reasons to buy John Deere 744K High-Lift:
Shovel
Breakout power | 171 kN and 355.8 kN | 52 % less or 184.8 kN |
Operation
Turn radius | 6280 mm and 8560 mm | 27 % less or 2280 mm |
Hydraulic system
Lifting time | 5.9 sec and 8.6 sec | 31 % less or 2.7 sec |
Unloading time | 1.4 sec and 3 sec | 53 % less or 1.6 sec |
Lowering time | 2.8 sec and 5 sec | 44 % less or 2.2 sec |
Gear box
Maximum forward speed | 40 km/h and 34.6 km/h | 13 % more or 5.4 km/h |
Neutral reasons:
Sizes
Length with bucket on ground level | 10236 mm and 9640 mm |
Height to cab upper part | 3912 mm and 3500 mm |
Between tyres width | 3454 mm and 2957 mm |
Wheelbase | 3759 mm and 3460 mm |
Hinge axis maximum height | 5004 mm and 4800 mm |
Shovel
Shovel width | 3759 mm and 3270 mm |
Operation
Rear axle oscillating | 24 degrees and 26 degrees |
Tyre size | 29.5-29 (28 PR) L-4 and 26.5 R 25 |
Working weight | 41308.7 kg and 24733 kg |
Operating voltage | 24 V and 24 V |
Motor
Cylinders number | 6 and 6 |
Aspiration | turbocharging and Turbocharger with charge air cooler by oncoming air flow |
Manufacturer | Cummins and John Deere |
Model | KT-19-C and 6090H, III Level III certified |
Hydraulic system
Type of pump | gear type pump and two variable displacement piston pumps, axial, with load sensing |
Overflow valve pressure | 18960.6 kPa and 22669.9 kPa |
Gear box
Transmission type | Clark Powershift transmission of intermediate type and Powershift transmission of intermediate type |
Forward gears number | 4 and 4 |
Images
Sizes
1. Length with bucket on ground level | 10236 mm | 1. Length with bucket on ground level | 9640 mm |
2. Between tyres width | 3454 mm | 2. Between tyres width | 2957 mm |
3. Height to cab upper part | 3912 mm | 3. Height to cab upper part | 3500 mm |
4. Wheelbase | 3759 mm | 4. Wheelbase | 3460 mm |
5. Clearance | 559 mm | 5. Clearance | 460 mm |
6. Hinge axis maximum height | 5004 mm | 6. Hinge axis maximum height | 4800 mm |
8. Radius at maximum lifting and unloading | 1702 mm | 8. Radius at maximum lifting and unloading | 1380 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 3734 mm | 7. Unloading ground clearance at maximum lifting | 3610 mm |