vs.

      New Holland W170TC vs. Liebherr L524

      15 reasons to buy New Holland W170TC:

      Sizes

      Radius at maximum lifting and unloading 1215 mm and 870 mm 28 % more or 345 mm

      Shovel

      Bucket capacity with top 2.8 m3 and 2 m3 29 % more or 0.8 m3
      Unloading ground clearance at maximum lifting 2860 mm and 2850 mm 0 % more or 10 mm

      Operation

      Static tipping weight 11600 kg and 8030 kg 31 % more or 3570 kg
      Fuel Capacity 253 l. and 160 l. 37 % more or 93 l.
      Hydraulic system fluid volume 193 l. and 130 l. 33 % more or 63 l.
      Engine oil volume 15 l. and 12 l. 20 % more or 3 l.

      Motor

      Displacement 6.8 l. and 4.5 l. 34 % more or 2.3 l.
      Cylinders number 6 and 4 33 % more or 2

      Hydraulic system

      Lowering time 3.3 sec and 5 sec 34 % less or 1.7 sec
      Pump bandwidth 206 l/min and 105 l/min 49 % more or 101 l/min
      Lifting time 5.6 sec and 6.5 sec 14 % less or 0.9 sec

      Gear box

      Forward gears number 4 and 2 50 % more or 2
      Reverse gears number 3 and 2 33 % more or 1
      Maximum forward speed 38 km/h and 33 km/h 13 % more or 5 km/h

      6 reasons to buy Liebherr L524:

      Sizes

      Clearance 520 mm and 365 mm 30 % more or 155 mm

      Operation

      Turn radius 5500 mm and 6300 mm 13 % less or 800 mm
      Generator current strength 55 amperes and 50 amperes 9 % more or 5 amperes

      Motor

      Power measured at 2400 rev / min and 2000 rev / min 17 % more or 400 rev

      Hydraulic system

      Unloading time 2 sec and 2.4 sec 17 % less or 0.4 sec

      Gear box

      Maximum reverse gear 33 km/h and 25.8 km/h 22 % more or 7.2 km/h

      Neutral reasons:

      Sizes

      Length with bucket on ground level 7760 mm and 6835 mm
      Height to cab upper part 3375 mm and 3150 mm
      Wheelbase 3255 mm and 2700 mm
      Hinge axis maximum height 3980 mm and 3760 mm

      Shovel

      Shovel width 2760 mm and 2500 mm

      Operation

      Rear axle oscillating 24 degrees and 12 degrees
      Tyre size 23.5-25 RT-3B and 17.5 R 25
      Operating voltage 24 V and 24 V
      Working weight 13810 kg and 10100 kg

      Motor

      Model CNH F4HE0684J and D 504 T
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and Engine with in-line cylinders, water cooling, turbocharging

      Hydraulic system

      Type of pump pressure measurement circuit, with locking in the middle position and Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit
      Overflow valve pressure 25000 kPa and 30000 kPa

      Gear box

      Transmission type Powershift transmission of intermediate type and Stepless hydrostatic travel drive system

      Images

      Sizes

      1. Length with bucket on ground level 7760 mm 1. Length with bucket on ground level 6835 mm
      3. Height to cab upper part 3375 mm 3. Height to cab upper part 3150 mm
      4. Wheelbase 3255 mm 4. Wheelbase 2700 mm
      5. Clearance 365 mm 5. Clearance 520 mm
      6. Hinge axis maximum height 3980 mm 6. Hinge axis maximum height 3760 mm
      8. Radius at maximum lifting and unloading 1215 mm 8. Radius at maximum lifting and unloading 870 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 2860 mm 7. Unloading ground clearance at maximum lifting 2850 mm