vs.

      New Holland W50TC vs. Caterpillar 972H

      5 reasons to buy New Holland W50TC:

      Shovel

      Breakout power 37.3 kN and 230 kN 84 % less or 192.7 kN

      Operation

      Turn radius 3847 mm and 7469 mm 48 % less or 3622 mm

      Motor

      Power measured at 2300 rev / min and 1800 rev / min 22 % more or 500 rev
      Torque measured at 1700 rev / min and 1400 rev / min 18 % more or 300 rev

      Hydraulic system

      Unloading time 1 sec and 2.1 sec 52 % less or 1.1 sec

      21 reasons to buy Caterpillar 972H:

      Sizes

      Clearance 496 mm and 330 mm 33 % more or 166 mm
      Radius at maximum lifting and unloading 1291 mm and 838 mm 35 % more or 453 mm

      Shovel

      Unloading ground clearance at maximum lifting 3252 mm and 2829 mm 13 % more or 423 mm

      Operation

      Engine oil volume 35 l. and 9.8 l. 72 % more or 25.2 l.
      Cooling system fluid volume 39 l. and 11.4 l. 71 % more or 27.6 l.
      Fuel Capacity 380 l. and 99.9 l. 74 % more or 280.1 l.
      Front axle / differential fluid volume 64 l. and 7.6 l. 88 % more or 56.4 l.
      Rear axle / differential fluid volume 64 l. and 9.1 l. 86 % more or 54.9 l.
      Hydraulic system fluid volume 110 l. and 56 l. 49 % more or 54 l.
      Static tipping weight 19067 kg and 3346.2 kg 82 % more or 15720.8 kg
      Generator current strength 80 amperes and 55 amperes 31 % more or 25 amperes

      Motor

      Effective power 214 kW and 38 kW 82 % more or 176 kW
      Full power 232 kW and 41 kW 82 % more or 191 kW
      Displacement 12.5 l. and 3.1 l. 75 % more or 9.4 l.
      Maximum torque 1332 Nm and 184.4 Nm 86 % more or 1147.6 Nm

      Hydraulic system

      Pump bandwidth 305 l/min and 53 l/min 83 % more or 252 l/min
      Lifting time 5.9 sec and 6 sec 2 % less or 0.1 sec
      Lowering time 2.4 sec and 3 sec 20 % less or 0.6 sec

      Gear box

      Forward gears number 4 and 2 50 % more or 2
      Reverse gears number 4 and 2 50 % more or 2
      Maximum forward speed 36.9 km/h and 18.7 km/h 49 % more or 18.2 km/h

      Neutral reasons:

      Sizes

      Between tyres width 1857 mm and 2956 mm
      Wheelbase 2182 mm and 3450 mm
      Height to cab upper part 2711 mm and 3606 mm
      Hinge axis maximum height 3243 mm and 4466 mm
      Length with bucket on ground level 5329 mm and 9144 mm

      Shovel

      Shovel width 1905 mm and 3220 mm

      Operation

      Working weight 4653 kg and 25148 kg
      Operating voltage 12 V and 24 V
      Rear axle oscillating 24 degrees and 26 degrees
      Tyre size 335/80 R18 and 26.5-25

      Motor

      Manufacturer Deutz and Caterpillar
      Model F4M2011 and C13 ACERT

      Hydraulic system

      Type of pump gear type pump and piston pump
      Overflow valve pressure 22994 kPa and 6900 kPa

      Gear box

      Transmission type Hydro-Static Transmission and powershift transmission

      Images

      Sizes

      1. Length with bucket on ground level 5329 mm 1. Length with bucket on ground level 9144 mm
      2. Between tyres width 1857 mm 2. Between tyres width 2956 mm
      3. Height to cab upper part 2711 mm 3. Height to cab upper part 3606 mm
      4. Wheelbase 2182 mm 4. Wheelbase 3450 mm
      5. Clearance 330 mm 5. Clearance 496 mm
      6. Hinge axis maximum height 3243 mm 6. Hinge axis maximum height 4466 mm
      8. Radius at maximum lifting and unloading 838 mm 8. Radius at maximum lifting and unloading 1291 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 2829 mm 7. Unloading ground clearance at maximum lifting 3252 mm