vs.

      TCM 840 vs. Liebherr L524

      17 reasons to buy TCM 840:

      Sizes

      Radius at maximum lifting and unloading 1060 mm and 870 mm 18 % more or 190 mm

      Shovel

      Bucket capacity with top 2.4 m3 and 2 m3 17 % more or 0.4 m3

      Operation

      Front axle / differential fluid volume 34 l. and 12.2 l. 64 % more or 21.8 l.
      Rear axle / differential fluid volume 34 l. and 12.7 l. 63 % more or 21.3 l.
      Static tipping weight 8050 kg and 8030 kg 0 % more or 20 kg
      Fuel Capacity 170 l. and 160 l. 6 % more or 10 l.

      Motor

      Torque measured at 1600 rev / min and 1400 rev / min 12 % more or 200 rev
      Cylinders number 6 and 4 33 % more or 2
      Maximum torque 446.1 Nm and 424 Nm 5 % more or 22.1 Nm

      Hydraulic system

      Pump bandwidth 184 l/min and 105 l/min 43 % more or 79 l/min
      Lifting time 6 sec and 6.5 sec 8 % less or 0.5 sec
      Unloading time 1.5 sec and 2 sec 25 % less or 0.5 sec
      Lowering time 3 sec and 5 sec 40 % less or 2 sec

      Gear box

      Forward gears number 3 and 2 33 % more or 1
      Reverse gears number 3 and 2 33 % more or 1
      Maximum forward speed 34.8 km/h and 33 km/h 5 % more or 1.8 km/h
      Maximum reverse gear 34.8 km/h and 33 km/h 5 % more or 1.8 km/h

      7 reasons to buy Liebherr L524:

      Sizes

      Clearance 520 mm and 370 mm 29 % more or 150 mm

      Shovel

      Breakout power 92 kN and 104.9 kN 12 % less or 12.9 kN
      Unloading ground clearance at maximum lifting 2850 mm and 2800 mm 2 % more or 50 mm

      Operation

      Engine oil volume 12 l. and 10 l. 17 % more or 2 l.
      Generator current strength 55 amperes and 25 amperes 55 % more or 30 amperes
      Hydraulic system fluid volume 130 l. and 80 l. 38 % more or 50 l.

      Motor

      Power measured at 2400 rev / min and 2200 rev / min 8 % more or 200 rev

      Neutral reasons:

      Sizes

      Hinge axis maximum height 3700 mm and 3760 mm
      Length with bucket on ground level 6630 mm and 6835 mm
      Height to cab upper part 3190 mm and 3150 mm
      Wheelbase 2900 mm and 2700 mm

      Shovel

      Shovel width 2480 mm and 2500 mm

      Operation

      Operating voltage 24 V and 24 V
      Rear axle oscillating 24 degrees and 12 degrees
      Tyre size 17.5-25-12PR L2 and 17.5 R 25
      Working weight 9890 kg and 10100 kg

      Motor

      Manufacturer Isuzu and Liebherr
      Model 6BDIT and D 504 T
      Aspiration turbocharging and Engine with in-line cylinders, water cooling, turbocharging

      Hydraulic system

      Overflow valve pressure 18615.8 kPa and 30000 kPa
      Type of pump closed and under the pressure and Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit

      Gear box

      Transmission type powershift transmission with camshaft and Stepless hydrostatic travel drive system

      Images

      Sizes

      1. Length with bucket on ground level 6630 mm 1. Length with bucket on ground level 6835 mm
      3. Height to cab upper part 3190 mm 3. Height to cab upper part 3150 mm
      4. Wheelbase 2900 mm 4. Wheelbase 2700 mm
      5. Clearance 370 mm 5. Clearance 520 mm
      6. Hinge axis maximum height 3700 mm 6. Hinge axis maximum height 3760 mm
      8. Radius at maximum lifting and unloading 1060 mm 8. Radius at maximum lifting and unloading 870 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 2800 mm 7. Unloading ground clearance at maximum lifting 2850 mm