- Home/
- Comparison/
- Wheel-Mounted Loader/
- Terex TL60 vs. Liebherr L538
Terex TL60 vs. Liebherr L538
3 reasons to buy Terex TL60:
Shovel
Breakout power | 37 kN and 105 kN | 65 % less or 68 kN |
Operation
Turn radius | 3870 mm and 5795 mm | 33 % less or 1925 mm |
Motor
Power measured at | 2300 rev / min and 2000 rev / min | 13 % more or 300 rev |
10 reasons to buy Liebherr L538:
Sizes
Clearance | 460 mm and 410 mm | 11 % more or 50 mm |
Radius at maximum lifting and unloading | 970 mm and 580 mm | 40 % more or 390 mm |
Shovel
Unloading ground clearance at maximum lifting | 2870 mm and 2520 mm | 12 % more or 350 mm |
Operation
Static tipping weight | 10160 kg and 2750 kg | 73 % more or 7410 kg |
Fuel Capacity | 160 l. and 75 l. | 53 % more or 85 l. |
Hydraulic system fluid volume | 130 l. and 49 l. | 62 % more or 81 l. |
Motor
Displacement | 6.6 l. and 3.1 l. | 53 % more or 3.5 l. |
Hydraulic system
Pump bandwidth | 140 l/min and 41.6 l/min | 70 % more or 98.4 l/min |
Gear box
Maximum forward speed | 34 km/h and 17.7 km/h | 48 % more or 16.3 km/h |
Maximum reverse gear | 34 km/h and 17.7 km/h | 48 % more or 16.3 km/h |
Neutral reasons:
Sizes
Length with bucket on ground level | 4780 mm and 7135 mm |
Height to cab upper part | 2440 mm and 3250 mm |
Wheelbase | 1950 mm and 2900 mm |
Hinge axis maximum height | 3120 mm and 3900 mm |
Shovel
Shovel width | 1700 mm and 2500 mm |
Operation
Operating voltage | 12 V and 24 V |
Rear axle oscillating | 24 degrees and 12 degrees |
Working weight | 3900 kg and 12260 kg |
Tyre size | 12 x 16.5 EM 14 and 20.5 R 25 |
Motor
Manufacturer | Deutz and Liebherr |
Model | F4M 2011 and D 924 TI-E A1 |
Cylinders number | 4 and 4 |
Aspiration | natural aspiration and Engine with in-line cylinders, water-cooled, with release and exhaust gas turbocharger with intermediate air cooling |
Hydraulic system
Overflow valve pressure | 24993.5 kPa and 30000 kPa |
Gear box
Transmission type | hydrostatic and Stepless hydrostatic travel drive system |
Forward gears number | 2 and 2 |
Reverse gears number | 2 and 2 |
Images
Sizes
1. Length with bucket on ground level | 4780 mm | 1. Length with bucket on ground level | 7135 mm |
3. Height to cab upper part | 2440 mm | 3. Height to cab upper part | 3250 mm |
4. Wheelbase | 1950 mm | 4. Wheelbase | 2900 mm |
5. Clearance | 410 mm | 5. Clearance | 460 mm |
6. Hinge axis maximum height | 3120 mm | 6. Hinge axis maximum height | 3900 mm |
8. Radius at maximum lifting and unloading | 580 mm | 8. Radius at maximum lifting and unloading | 970 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 2520 mm | 7. Unloading ground clearance at maximum lifting | 2870 mm |