vs.

      Terex TXL200-2 vs. John Deere 744H MH

      7 reasons to buy Terex TXL200-2:

      Shovel

      Breakout power 103 kN and 16860 kN 99 % less or 16757 kN

      Operation

      Transmission fluid volume 30 l. and 28 l. 7 % more or 2 l.
      Turn radius 5210 mm and 6140 mm 15 % less or 930 mm
      Generator current strength 70 amperes and 55 amperes 21 % more or 15 amperes

      Motor

      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev

      Hydraulic system

      Lifting time 5.8 sec and 6.1 sec 5 % less or 0.3 sec
      Unloading time 1.1 sec and 1.5 sec 27 % less or 0.4 sec

      19 reasons to buy John Deere 744H MH:

      Sizes

      Clearance 465 mm and 445 mm 4 % more or 20 mm
      Radius at maximum lifting and unloading 1900 mm and 1000 mm 47 % more or 900 mm

      Shovel

      Bucket capacity with top 4.4 m3 and 2.5 m3 43 % more or 1.9 m3
      Unloading ground clearance at maximum lifting 3202 mm and 2730 mm 15 % more or 472 mm

      Operation

      Fuel Capacity 432 l. and 243 l. 44 % more or 189 l.
      Hydraulic system fluid volume 144 l. and 115 l. 20 % more or 29 l.
      Engine oil volume 38 l. and 27 l. 29 % more or 11 l.
      Cooling system fluid volume 43 l. and 40 l. 7 % more or 3 l.
      Front axle / differential fluid volume 46 l. and 19.4 l. 58 % more or 26.6 l.
      Rear axle / differential fluid volume 46 l. and 18.4 l. 60 % more or 27.6 l.
      Static tipping weight 16470 kg and 8870 kg 46 % more or 7600 kg

      Motor

      Maximum torque 1330 Nm and 686 Nm 48 % more or 644 Nm
      Full power 211 kW and 106.6 kW 49 % more or 104.4 kW
      Displacement 12.5 l. and 5.9 l. 53 % more or 6.6 l.
      Torque measured at 1500 rev / min and 1400 rev / min 7 % more or 100 rev

      Hydraulic system

      Pump bandwidth 423 l/min and 207.8 l/min 51 % more or 215.2 l/min
      Lowering time 2.8 sec and 4.1 sec 32 % less or 1.3 sec

      Gear box

      Maximum forward speed 39.5 km/h and 35 km/h 11 % more or 4.5 km/h
      Maximum reverse gear 31 km/h and 25 km/h 19 % more or 6 km/h

      Neutral reasons:

      Sizes

      Length with bucket on ground level 7285 mm and 8925 mm
      Between tyres width 2460 mm and 2940 mm
      Height to cab upper part 3240 mm and 3520 mm
      Wheelbase 2900 mm and 3400 mm
      Hinge axis maximum height 3830 mm and 4510 mm

      Shovel

      Shovel width 2550 mm and 3275 mm

      Operation

      Working weight 11645.1 kg and 23400.8 kg
      Operating voltage 24 V and 24 V
      Rear axle oscillating 22 degrees and 26 degrees
      Tyre size 20.5-25-12PR and 26.5-25

      Motor

      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer Doosan and John Deere
      Model DL06 and 6125A
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump Pumps with 3 gears and piston pump
      Overflow valve pressure 19994.8 kPa and 22000 kPa

      Gear box

      Transmission type powershift and powershift
      Forward gears number 4 and 4
      Reverse gears number 3 and 3

      Images

      Sizes

      1. Length with bucket on ground level 7285 mm 1. Length with bucket on ground level 8925 mm
      2. Between tyres width 2460 mm 2. Between tyres width 2940 mm
      3. Height to cab upper part 3240 mm 3. Height to cab upper part 3520 mm
      4. Wheelbase 2900 mm 4. Wheelbase 3400 mm
      5. Clearance 445 mm 5. Clearance 465 mm
      6. Hinge axis maximum height 3830 mm 6. Hinge axis maximum height 4510 mm
      8. Radius at maximum lifting and unloading 1000 mm 8. Radius at maximum lifting and unloading 1900 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 2730 mm 7. Unloading ground clearance at maximum lifting 3202 mm