- Home/
- Comparison/
- Wheel-Mounted Loader/
- Terex TXL250-2 vs. Hyundai HL730-7
Terex TXL250-2 vs. Hyundai HL730-7
17 reasons to buy Terex TXL250-2:
Sizes
Clearance | 410 mm and 370 mm | 10 % more or 40 mm |
Radius at maximum lifting and unloading | 1210 mm and 1005 mm | 17 % more or 205 mm |
Shovel
Bucket capacity with top | 2.5 m3 and 1.8 m3 | 28 % more or 0.7 m3 |
Operation
Static tipping weight | 12200 kg and 7880 kg | 35 % more or 4320 kg |
Fuel Capacity | 255 l. and 202 l. | 21 % more or 53 l. |
Engine oil volume | 27 l. and 11 l. | 59 % more or 16 l. |
Cooling system fluid volume | 45 l. and 30 l. | 33 % more or 15 l. |
Transmission fluid volume | 45 l. and 20 l. | 56 % more or 25 l. |
Front axle / differential fluid volume | 31 l. and 18.4 l. | 41 % more or 12.6 l. |
Rear axle / differential fluid volume | 24 l. and 18.4 l. | 23 % more or 5.6 l. |
Motor
Full power | 121.5 kW and 93.2 kW | 23 % more or 28.3 kW |
Displacement | 5.9 l. and 3.9 l. | 34 % more or 2.0 l. |
Torque measured at | 1400 rev / min and 1300 rev / min | 7 % more or 100 rev |
Cylinders number | 6 and 4 | 33 % more or 2 |
Maximum torque | 804 Nm and 505.7 Nm | 37 % more or 298.3 Nm |
Hydraulic system
Pump bandwidth | 280.1 l/min and 140 l/min | 50 % more or 140.1 l/min |
Gear box
Maximum reverse gear | 23.5 km/h and 23.3 km/h | 1 % more or 0.2 km/h |
7 reasons to buy Hyundai HL730-7:
Shovel
Unloading ground clearance at maximum lifting | 2730 mm and 2700 mm | 1 % more or 30 mm |
Breakout power | 94 kN and 129 kN | 27 % less or 35 kN |
Operation
Hydraulic system fluid volume | 160 l. and 158 l. | 1 % more or 2 l. |
Motor
Power measured at | 2200 rev / min and 2100 rev / min | 5 % more or 100 rev |
Hydraulic system
Unloading time | 1 sec and 1.3 sec | 23 % less or 0.3 sec |
Lowering time | 2.6 sec and 3.3 sec | 21 % less or 0.7 sec |
Gear box
Maximum forward speed | 37 km/h and 34 km/h | 8 % more or 3 km/h |
Neutral reasons:
Sizes
Length with bucket on ground level | 7694 mm and 6850 mm |
Between tyres width | 2608 mm and 2450 mm |
Height to cab upper part | 3260 mm and 3170 mm |
Wheelbase | 3020 mm and 2750 mm |
Hinge axis maximum height | 3856 mm and 3640 mm |
Operation
Operating voltage | 24 V and 24 V |
Generator current strength | 70 amperes and 70 amperes |
Rear axle oscillating | 22 degrees and 24 degrees |
Tyre size | 20.5-25-16PR and 17.5-25 12PR L3 |
Working weight | 14000.1 kg and 9700 kg |
Motor
Aspiration | turbocharging and turbocharging |
Manufacturer | Doosan and Cummins |
Model | DL06 and B3.9-C |
Hydraulic system
Type of pump | vane pump with triple section and screw gear type |
Overflow valve pressure | 19601.8 kPa and 20615.3 kPa |
Lifting time | 5.4 sec and 5.4 sec |
Gear box
Transmission type | powershift transmission and fully automatic powershift, intermediate type |
Forward gears number | 4 and 4 |
Reverse gears number | 3 and 3 |
Images
Sizes
4. Wheelbase | 3020 mm | 4. Wheelbase | 2750 mm |
5. Clearance | 410 mm | 5. Clearance | 370 mm |
6. Hinge axis maximum height | 3856 mm | 6. Hinge axis maximum height | 3640 mm |
8. Radius at maximum lifting and unloading | 1210 mm | 8. Radius at maximum lifting and unloading | 1005 mm |
1. Length with bucket on ground level | 7694 mm | 1. Length with bucket on ground level | 6850 mm |
2. Between tyres width | 2608 mm | 2. Between tyres width | 2450 mm |
3. Height to cab upper part | 3260 mm | 3. Height to cab upper part | 3170 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 2700 mm | 7. Unloading ground clearance at maximum lifting | 2730 mm |