- Home/
- Comparison/
- Wheel-Mounted Loader/
- Terex TXL400-2 vs. Dressta 530H
Terex TXL400-2 vs. Dressta 530H
19 reasons to buy Terex TXL400-2:
Sizes
Clearance | 510 mm and 506 mm | 1 % more or 4 mm |
Shovel
Breakout power | 220 kN and 13720 kN | 98 % less or 13500 kN |
Unloading ground clearance at maximum lifting | 2975 mm and 300 mm | 90 % more or 2675 mm |
Bucket capacity with top | 3.9 m3 and 2.8 m3 | 28 % more or 1.1 m3 |
Operation
Engine oil volume | 25 l. and 19 l. | 24 % more or 6 l. |
Static tipping weight | 18900 kg and 13570 kg | 28 % more or 5330 kg |
Cooling system fluid volume | 50 l. and 24 l. | 52 % more or 26 l. |
Turn radius | 6350 mm and 6540 mm | 3 % less or 190 mm |
Transmission fluid volume | 54 l. and 31 l. | 43 % more or 23 l. |
Fuel Capacity | 365 l. and 300 l. | 18 % more or 65 l. |
Hydraulic system fluid volume | 265 l. and 165 l. | 38 % more or 100 l. |
Motor
Full power | 208.8 kW and 153 kW | 27 % more or 55.8 kW |
Displacement | 8.9 l. and 8.3 l. | 7 % more or 0.6 l. |
Maximum torque | 1453.4 Nm and 968 Nm | 33 % more or 485.4 Nm |
Hydraulic system
Unloading time | 1.4 sec and 2.5 sec | 44 % less or 1.1 sec |
Pump bandwidth | 380.1 l/min and 277 l/min | 27 % more or 103.1 l/min |
Lowering time | 3 sec and 4 sec | 25 % less or 1 sec |
Gear box
Maximum forward speed | 38 km/h and 37.3 km/h | 2 % more or 0.7 km/h |
Maximum reverse gear | 28 km/h and 26.4 km/h | 6 % more or 1.6 km/h |
2 reasons to buy Dressta 530H:
Motor
Torque measured at | 1500 rev / min and 1400 rev / min | 7 % more or 100 rev |
Hydraulic system
Lifting time | 5.9 sec and 6 sec | 2 % less or 0.1 sec |
Neutral reasons:
Sizes
Height to cab upper part | 3522 mm and 3404.6 mm |
Length with bucket on ground level | 8710 mm and 79900 mm |
Between tyres width | 2985 mm and 2100 mm |
Wheelbase | 3500 mm and 3301 mm |
Hinge axis maximum height | 4350 mm and 39600 mm |
Shovel
Shovel width | 3200 mm and 300 mm |
Operation
Operating voltage | 24 V and 24 V |
Generator current strength | 70 amperes and 70 amperes |
Rear axle oscillating | 24 degrees and 24 degrees |
Tyre size | 26.5-25-20PR-L3 and 23.5x25,20 PR(L-3) |
Working weight | 22500 kg and 16500 kg |
Motor
Manufacturer | Cummins and Cummins |
Model | QSL 9 and C 8.3 |
Power measured at | 2000 rev / min and 2000 rev / min |
Cylinders number | 6 and 6 |
Aspiration | turbocharging and 4-stroke diesel engine, turbocharging, CAC, direct run, direct injection |
Hydraulic system
Type of pump | two variable displacement piston pumps, axial, with load sensing and Three multiple vaned cartriges, actuated with auxiliary drive |
Overflow valve pressure | 25000.4 kPa and 20684.3 kPa |
Gear box
Transmission type | powershift transmission and Gearbox with electrohydraulic control, switchable under full load with automatic gear changes |
Forward gears number | 4 and 4 |
Reverse gears number | 3 and 3 |
Images
Sizes
1. Length with bucket on ground level | 8710 mm | 1. Length with bucket on ground level | 79900 mm |
2. Between tyres width | 2985 mm | 2. Between tyres width | 2100 mm |
3. Height to cab upper part | 3522 mm | 3. Height to cab upper part | 3404.6 mm |
4. Wheelbase | 3500 mm | 4. Wheelbase | 3301 mm |
5. Clearance | 510 mm | 5. Clearance | 506 mm |
6. Hinge axis maximum height | 4350 mm | 6. Hinge axis maximum height | 39600 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 2975 mm | 7. Unloading ground clearance at maximum lifting | 300 mm |