- Home/
- Comparison/
- Wheel-Mounted Loader/
- Volvo BM 4200 vs. Liebherr L574 2 plus 2
Volvo BM 4200 vs. Liebherr L574 2 plus 2
7 reasons to buy Volvo BM 4200:
Shovel
Breakout power | 57.6 kN and 175 kN | 67 % less or 117.4 kN |
Operation
Turn radius | 4260 mm and 7090 mm | 40 % less or 2830 mm |
Motor
Torque measured at | 1400 rev / min and 1200 rev / min | 14 % more or 200 rev |
Power measured at | 2200 rev / min and 2000 rev / min | 9 % more or 200 rev |
Hydraulic system
Lifting time | 5.2 sec and 5.6 sec | 7 % less or 0.4 sec |
Unloading time | 1.7 sec and 2 sec | 15 % less or 0.3 sec |
Lowering time | 2.9 sec and 3.5 sec | 17 % less or 0.6 sec |
17 reasons to buy Liebherr L574 2 plus 2:
Sizes
Radius at maximum lifting and unloading | 1270 mm and 720 mm | 43 % more or 550 mm |
Clearance | 550 mm and 380 mm | 31 % more or 170 mm |
Shovel
Unloading ground clearance at maximum lifting | 3300 mm and 2800 mm | 15 % more or 500 mm |
Operation
Fuel Capacity | 330 l. and 95 l. | 71 % more or 235 l. |
Hydraulic system fluid volume | 240 l. and 105 l. | 56 % more or 135 l. |
Engine oil volume | 23.5 l. and 8 l. | 66 % more or 15.5 l. |
Front axle / differential fluid volume | 51 l. and 7.5 l. | 85 % more or 43.5 l. |
Rear axle / differential fluid volume | 51 l. and 7.5 l. | 85 % more or 43.5 l. |
Static tipping weight | 18350 kg and 3400 kg | 81 % more or 14950 kg |
Generator current strength | 55 amperes and 45 amperes | 18 % more or 10 amperes |
Motor
Maximum torque | 1285 Nm and 254 Nm | 80 % more or 1031 Nm |
Cylinders number | 6 and 4 | 33 % more or 2 |
Full power | 197.6 kW and 52.2 kW | 74 % more or 145.4 kW |
Displacement | 10 l. and 3.9 l. | 61 % more or 6.1 l. |
Hydraulic system
Pump bandwidth | 290 l/min and 103 l/min | 64 % more or 187 l/min |
Gear box
Maximum reverse gear | 40 km/h and 30 km/h | 25 % more or 10 km/h |
Maximum forward speed | 40 km/h and 30 km/h | 25 % more or 10 km/h |
Neutral reasons:
Sizes
Length with bucket on ground level | 5650 mm and 8980 mm |
Height to cab upper part | 2750 mm and 3540 mm |
Wheelbase | 2725 mm and 3450 mm |
Hinge axis maximum height | 3570 mm and 4565 mm |
Shovel
Shovel width | 2000 mm and 3000 mm |
Operation
Tyre size | 14.9-24/12 and 26.5 R 25 |
Working weight | 5715.3 kg and 24250 kg |
Operating voltage | 24 V and 24 V |
Rear axle oscillating | 22 degrees and 26 degrees |
Motor
Manufacturer | Volvo and Liebherr |
Model | D 39 L and D 926 TI-E A2 |
Hydraulic system
Type of pump | gear type pump and Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit |
Overflow valve pressure | 9790.5 kPa and 35000 kPa |
Gear box
Transmission type | powershift transmission and Stepless hydrostatic travel drive system 2+2 |
Forward gears number | 3 and 3 |
Reverse gears number | 3 and 3 |
Images
Sizes
1. Length with bucket on ground level | 5650 mm | 1. Length with bucket on ground level | 8980 mm |
3. Height to cab upper part | 2750 mm | 3. Height to cab upper part | 3540 mm |
4. Wheelbase | 2725 mm | 4. Wheelbase | 3450 mm |
5. Clearance | 380 mm | 5. Clearance | 550 mm |
6. Hinge axis maximum height | 3570 mm | 6. Hinge axis maximum height | 4565 mm |
8. Radius at maximum lifting and unloading | 720 mm | 8. Radius at maximum lifting and unloading | 1270 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 2800 mm | 7. Unloading ground clearance at maximum lifting | 3300 mm |