vs.

      Volvo L35B vs. Liebherr L538

      8 reasons to buy Volvo L35B:

      Shovel

      Breakout power 48 kN and 105 kN 54 % less or 57 kN

      Operation

      Turn radius 4375 mm and 5795 mm 25 % less or 1420 mm
      Generator current strength 80 amperes and 55 amperes 31 % more or 25 amperes

      Motor

      Torque measured at 1600 rev / min and 1400 rev / min 12 % more or 200 rev
      Power measured at 2600 rev / min and 2000 rev / min 23 % more or 600 rev

      Hydraulic system

      Lifting time 5.5 sec and 6 sec 8 % less or 0.5 sec
      Unloading time 1.2 sec and 1.6 sec 25 % less or 0.4 sec
      Lowering time 3.5 sec and 4 sec 12 % less or 0.5 sec

      16 reasons to buy Liebherr L538:

      Sizes

      Clearance 460 mm and 445 mm 3 % more or 15 mm
      Radius at maximum lifting and unloading 970 mm and 810 mm 16 % more or 160 mm

      Shovel

      Unloading ground clearance at maximum lifting 2870 mm and 2560 mm 11 % more or 310 mm
      Bucket capacity with top 2.5 m3 and 1.2 m3 52 % more or 1.3 m3

      Operation

      Fuel Capacity 160 l. and 86 l. 46 % more or 74 l.
      Hydraulic system fluid volume 130 l. and 65 l. 50 % more or 65 l.
      Engine oil volume 20.5 l. and 10.5 l. 49 % more or 10.0 l.
      Front axle / differential fluid volume 15.5 l. and 11 l. 29 % more or 4.5 l.
      Rear axle / differential fluid volume 15.5 l. and 12 l. 23 % more or 3.5 l.
      Static tipping weight 10160 kg and 4350 kg 57 % more or 5810 kg

      Motor

      Displacement 6.6 l. and 3.1 l. 53 % more or 3.5 l.
      Maximum torque 567 Nm and 241 Nm 57 % more or 326 Nm
      Full power 101.4 kW and 57.4 kW 43 % more or 44.0 kW

      Hydraulic system

      Pump bandwidth 140 l/min and 73 l/min 48 % more or 67 l/min

      Gear box

      Maximum forward speed 34 km/h and 30 km/h 12 % more or 4 km/h
      Maximum reverse gear 34 km/h and 30 km/h 12 % more or 4 km/h

      Neutral reasons:

      Sizes

      Height to cab upper part 2715 mm and 3250 mm
      Length with bucket on ground level 5400 mm and 7135 mm
      Wheelbase 2150 mm and 2900 mm
      Hinge axis maximum height 3315 mm and 3900 mm

      Shovel

      Shovel width 2000 mm and 2500 mm

      Operation

      Tyre size 406/70 R20 and 20.5 R 25
      Working weight 5930 kg and 12260 kg
      Operating voltage 12 V and 24 V
      Rear axle oscillating 20 degrees and 12 degrees

      Motor

      Cylinders number 4 and 4
      Aspiration turbocharging and Engine with in-line cylinders, water-cooled, with release and exhaust gas turbocharger with intermediate air cooling
      Manufacturer Volvo and Liebherr
      Model D3DCEE2 and D 924 TI-E A1

      Hydraulic system

      Type of pump gear type pump and Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit
      Overflow valve pressure 23000 kPa and 30000 kPa

      Gear box

      Transmission type hydrostatic and Stepless hydrostatic travel drive system
      Forward gears number 2 and 2
      Reverse gears number 2 and 2

      Images

      Sizes

      3. Height to cab upper part 2715 mm 3. Height to cab upper part 3250 mm
      4. Wheelbase 2150 mm 4. Wheelbase 2900 mm
      5. Clearance 445 mm 5. Clearance 460 mm
      6. Hinge axis maximum height 3315 mm 6. Hinge axis maximum height 3900 mm
      8. Radius at maximum lifting and unloading 810 mm 8. Radius at maximum lifting and unloading 970 mm
      1. Length with bucket on ground level 5400 mm 1. Length with bucket on ground level 7135 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 2560 mm 7. Unloading ground clearance at maximum lifting 2870 mm