- Home/
- Comparison/
- Wheel-Mounted Loader/
- Volvo ZL302C vs. Caterpillar 988H
Volvo ZL302C vs. Caterpillar 988H
6 reasons to buy Volvo ZL302C:
Shovel
Breakout power | 15 kN and 378.4 kN | 96 % less or 363.4 kN |
Operation
Turn radius | 2815 mm and 8543 mm | 67 % less or 5728 mm |
Motor
Power measured at | 3000 rev / min and 1800 rev / min | 40 % more or 1200 rev |
Hydraulic system
Lowering time | 3 sec and 3.8 sec | 21 % less or 0.8 sec |
Lifting time | 5 sec and 9.4 sec | 47 % less or 4.4 sec |
Unloading time | 1.5 sec and 2.4 sec | 37 % less or 0.9 sec |
19 reasons to buy Caterpillar 988H:
Sizes
Clearance | 549 mm and 230 mm | 58 % more or 319 mm |
Radius at maximum lifting and unloading | 2028 mm and 430 mm | 79 % more or 1598 mm |
Shovel
Unloading ground clearance at maximum lifting | 3466 mm and 2330 mm | 33 % more or 1136 mm |
Operation
Static tipping weight | 34825 kg and 1450 kg | 96 % more or 33375 kg |
Generator current strength | 100 amperes and 65 amperes | 35 % more or 35 amperes |
Fuel Capacity | 712 l. and 38 l. | 95 % more or 674 l. |
Hydraulic system fluid volume | 267 l. and 28 l. | 90 % more or 239 l. |
Engine oil volume | 60 l. and 4.3 l. | 93 % more or 55.7 l. |
Front axle / differential fluid volume | 186 l. and 5 l. | 97 % more or 181 l. |
Rear axle / differential fluid volume | 186 l. and 6 l. | 97 % more or 180 l. |
Motor
Full power | 414 kW and 23.1 kW | 94 % more or 390.9 kW |
Displacement | 18.1 l. and 1.4 l. | 92 % more or 16.7 l. |
Effective power | 373 kW and 22.4 kW | 94 % more or 350.6 kW |
Cylinders number | 6 and 4 | 33 % more or 2 |
Hydraulic system
Pump bandwidth | 492 l/min and 30 l/min | 94 % more or 462 l/min |
Gear box
Forward gears number | 4 and 1 | 75 % more or 3 |
Reverse gears number | 3 and 1 | 67 % more or 2 |
Maximum forward speed | 38.6 km/h and 20 km/h | 48 % more or 18.6 km/h |
Maximum reverse gear | 25.1 km/h and 20 km/h | 20 % more or 5.1 km/h |
Neutral reasons:
Sizes
Length with bucket on ground level | 3925 mm and 12215 mm |
Between tyres width | 1290 mm and 3579 mm |
Height to cab upper part | 2310 mm and 4128 mm |
Wheelbase | 1500 mm and 4550 mm |
Hinge axis maximum height | 2900 mm and 5853 mm |
Shovel
Shovel width | 980 mm and 3810 mm |
Operation
Rear axle oscillating | 20 degrees and 26 degrees |
Tyre size | 10.0/75-15.3 and 35/65 |
Operating voltage | 12 V and 24 V |
Working weight | 2100 kg and 49546 kg |
Motor
Manufacturer | Deutz and Caterpillar |
Model | F 4 M 1008F and C18 ACERT |
Hydraulic system
Overflow valve pressure | 21000 kPa and 31000 kPa |
Images
Sizes
6. Hinge axis maximum height | 2900 mm | 6. Hinge axis maximum height | 5853 mm |
8. Radius at maximum lifting and unloading | 430 mm | 8. Radius at maximum lifting and unloading | 2028 mm |
1. Length with bucket on ground level | 3925 mm | 1. Length with bucket on ground level | 12215 mm |
2. Between tyres width | 1290 mm | 2. Between tyres width | 3579 mm |
3. Height to cab upper part | 2310 mm | 3. Height to cab upper part | 4128 mm |
4. Wheelbase | 1500 mm | 4. Wheelbase | 4550 mm |
5. Clearance | 230 mm | 5. Clearance | 549 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 2330 mm | 7. Unloading ground clearance at maximum lifting | 3466 mm |