vs.

      Zettelmeyer ZL1002i vs. Michigan L140

      6 reasons to buy Zettelmeyer ZL1002i:

      Sizes

      Clearance 590 mm and 432 mm 27 % more or 158 mm

      Shovel

      Breakout power 64.5 kN and 191.7 kN 66 % less or 127.2 kN

      Operation

      Turn radius 4800 mm and 7442 mm 36 % less or 2642 mm

      Motor

      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev
      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev

      Hydraulic system

      Lifting time 6 sec and 7.5 sec 20 % less or 1.5 sec

      21 reasons to buy Michigan L140:

      Sizes

      Radius at maximum lifting and unloading 1041 mm and 800 mm 23 % more or 241 mm

      Shovel

      Unloading ground clearance at maximum lifting 2985 mm and 2715 mm 9 % more or 270 mm
      Bucket capacity with top 3.1 m3 and 1.2 m3 61 % more or 1.9 m3

      Operation

      Fuel Capacity 344 l. and 100 l. 71 % more or 244 l.
      Front axle / differential fluid volume 32.2 l. and 12.5 l. 61 % more or 19.7 l.
      Hydraulic system fluid volume 329 l. and 110 l. 67 % more or 219 l.
      Rear axle / differential fluid volume 32.2 l. and 13.3 l. 59 % more or 18.9 l.
      Engine oil volume 34.1 l. and 12 l. 65 % more or 22.1 l.
      Static tipping weight 14996 kg and 5300 kg 65 % more or 9696 kg
      Generator current strength 100 amperes and 55 amperes 45 % more or 45 amperes

      Motor

      Effective power 151.4 kW and 65.6 kW 57 % more or 85.8 kW
      Full power 167.8 kW and 68.6 kW 59 % more or 99.2 kW
      Displacement 10 l. and 4.8 l. 52 % more or 5.2 l.
      Maximum torque 1016.9 Nm and 392 Nm 61 % more or 624.9 Nm
      Cylinders number 6 and 4 33 % more or 2

      Hydraulic system

      Pump bandwidth 117.3 l/min and 106 l/min 10 % more or 11.3 l/min
      Lowering time 2 sec and 5 sec 60 % less or 3 sec

      Gear box

      Forward gears number 4 and 2 50 % more or 2
      Reverse gears number 4 and 2 50 % more or 2
      Maximum forward speed 32 km/h and 20 km/h 37 % more or 12 km/h
      Maximum reverse gear 32 km/h and 20 km/h 37 % more or 12 km/h

      Neutral reasons:

      Sizes

      Height to cab upper part 2860 mm and 3531 mm
      Wheelbase 2400 mm and 3251 mm
      Hinge axis maximum height 3470 mm and 4039 mm
      Length with bucket on ground level 5780 mm and 8280 mm
      Between tyres width 2160 mm and 2870 mm

      Shovel

      Shovel width 2250 mm and 3150 mm

      Operation

      Operating voltage 24 V and 24 V
      Rear axle oscillating 20 degrees and 18.5 degrees
      Tyre size 15.5-25 and 23.5-25 (16PR) L-3
      Working weight 7600 kg and 19150.7 kg

      Motor

      Model KHD BF 4M 1013 E and LT-10-225 HT
      Aspiration turbo + water cooling and Turbocharging with subsequent air cooling (by a cooling radiator)

      Hydraulic system

      Type of pump axial piston and gear type pump
      Overflow valve pressure 23000 kPa and 18960.6 kPa
      Unloading time 1.5 sec and 1.5 sec

      Gear box

      Transmission type hydrostatic powershift transmission and Clark R32425-6

      Images

      Sizes

      1. Length with bucket on ground level 5780 mm 1. Length with bucket on ground level 8280 mm
      2. Between tyres width 2160 mm 2. Between tyres width 2870 mm
      3. Height to cab upper part 2860 mm 3. Height to cab upper part 3531 mm
      4. Wheelbase 2400 mm 4. Wheelbase 3251 mm
      5. Clearance 590 mm 5. Clearance 432 mm
      6. Hinge axis maximum height 3470 mm 6. Hinge axis maximum height 4039 mm
      8. Radius at maximum lifting and unloading 800 mm 8. Radius at maximum lifting and unloading 1041 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 2715 mm 7. Unloading ground clearance at maximum lifting 2985 mm