- Home/
- Comparison/
- Wheel-Mounted Loader/
- Zettelmeyer ZL402C vs. Case 921E
Zettelmeyer ZL402C vs. Case 921E
5 reasons to buy Zettelmeyer ZL402C:
Operation
Turn radius | 3650 mm and 6870 mm | 47 % less or 3220 mm |
Motor
Power measured at | 2300 rev / min and 1800 rev / min | 22 % more or 500 rev |
Torque measured at | 1800 rev / min and 900 rev / min | 50 % more or 900 rev |
Hydraulic system
Lifting time | 6 sec and 6.2 sec | 3 % less or 0.2 sec |
Unloading time | 2.5 sec and 3.6 sec | 31 % less or 1.1 sec |
21 reasons to buy Case 921E:
Sizes
Clearance | 489 mm and 305 mm | 38 % more or 184 mm |
Radius at maximum lifting and unloading | 1270 mm and 630 mm | 50 % more or 640 mm |
Shovel
Unloading ground clearance at maximum lifting | 3080 mm and 2410 mm | 22 % more or 670 mm |
Operation
Fuel Capacity | 393.7 l. and 42 l. | 89 % more or 351.7 l. |
Hydraulic system fluid volume | 242 l. and 60 l. | 75 % more or 182 l. |
Engine oil volume | 36.9 l. and 7 l. | 81 % more or 29.9 l. |
Front axle / differential fluid volume | 47.3 l. and 5.5 l. | 88 % more or 41.8 l. |
Rear axle / differential fluid volume | 47.3 l. and 8 l. | 83 % more or 39.3 l. |
Static tipping weight | 19319 kg and 2500 kg | 87 % more or 16819 kg |
Generator current strength | 95 amperes and 60 amperes | 37 % more or 35 amperes |
Motor
Cylinders number | 6 and 3 | 50 % more or 3 |
Full power | 204 kW and 28.3 kW | 86 % more or 175.7 kW |
Displacement | 10.8 l. and 2 l. | 81 % more or 8.8 l. |
Maximum torque | 1373 Nm and 113.9 Nm | 92 % more or 1259.1 Nm |
Effective power | 221 kW and 26.8 kW | 88 % more or 194.2 kW |
Hydraulic system
Pump bandwidth | 162.1 l/min and 32 l/min | 80 % more or 130.1 l/min |
Lowering time | 3 sec and 5 sec | 40 % less or 2 sec |
Gear box
Forward gears number | 4 and 2 | 50 % more or 2 |
Reverse gears number | 3 and 2 | 33 % more or 1 |
Maximum forward speed | 37.4 km/h and 20 km/h | 47 % more or 17.4 km/h |
Maximum reverse gear | 25.8 km/h and 20 km/h | 22 % more or 5.8 km/h |
Neutral reasons:
Sizes
Length with bucket on ground level | 4490 mm and 8800 mm |
Between tyres width | 1610 mm and 2987 mm |
Height to cab upper part | 2490 mm and 3700 mm |
Wheelbase | 1850 mm and 3400 mm |
Hinge axis maximum height | 2980 mm and 4280 mm |
Shovel
Shovel width | 1650 mm and 3170 mm |
Operation
Rear axle oscillating | 20 degrees and 24 degrees |
Tyre size | 10.5-18 and 26.5 x 25 L3 with diagonal cord |
Working weight | 3401.9 kg and 22962 kg |
Operating voltage | 12 V and 24 V |
Motor
Model | KHD F 3 L 1011F and QSM 11, 3 level |
Hydraulic system
Overflow valve pressure | 21029 kPa and 24821 kPa |
Gear box
Transmission type | hydrostatic powershift transmission and 4 forward / 3 reverse gears proportional with electronic control module |
Images
Sizes
1. Length with bucket on ground level | 4490 mm | 1. Length with bucket on ground level | 8800 mm |
2. Between tyres width | 1610 mm | 2. Between tyres width | 2987 mm |
3. Height to cab upper part | 2490 mm | 3. Height to cab upper part | 3700 mm |
4. Wheelbase | 1850 mm | 4. Wheelbase | 3400 mm |
5. Clearance | 305 mm | 5. Clearance | 489 mm |
6. Hinge axis maximum height | 2980 mm | 6. Hinge axis maximum height | 4280 mm |
8. Radius at maximum lifting and unloading | 630 mm | 8. Radius at maximum lifting and unloading | 1270 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 2410 mm | 7. Unloading ground clearance at maximum lifting | 3080 mm |