- Home/
- Comparison/
- Hydraulic Autocrane/
- Grove TM880 vs. Terex 3063
Grove TM880 vs. Terex 3063
11 reasons to buy Grove TM880:
Operation
Axels number | 4 and 2 | 50 % more or 2 |
Haul truck fuel volume | 378.5 l. and 170 l. | 55 % more or 208.5 l. |
Gear box
Forward gears number | 13 and 7 | 46 % more or 6 |
Reverse gears number | 2 and 1 | 50 % more or 1 |
Carrying part engine
Displacement | 9.3 l. and 7.2 l. | 23 % more or 2.1 l. |
Maximum torque | 1014.2 Nm and 820.3 Nm | 19 % more or 193.9 Nm |
Full power | 227 kW and 156.6 kW | 31 % more or 70.4 kW |
Booms
Maximum lifting capacity | 72574.8 kg and 13607.8 kg | 81 % more or 58967.0 kg |
Maximum working radius | 30.5 m and 18.3 m | 40 % more or 12.2 m |
Sections number | 4 and 3 | 25 % more or 1 |
Max. height at max. lifting angle without boom | 34.7 m and 19.2 m | 45 % more or 15.5 m |
5 reasons to buy Terex 3063:
Gear box
Maximum forward speed | 119.1 km/h and 78.9 km/h | 34 % more or 40.2 km/h |
Carrying part engine
Torque measured at | 1440 rev / min and 1400 rev / min | 3 % more or 40 rev |
Power measured at | 2500 rev / min and 2100 rev / min | 16 % more or 400 rev |
Booms
Minimum operating radius | 1.5 m and 3 m | 50 % less or 1.5 m |
Minimum height at maximum lifting angle | 7.6 m and 11 m | 31 % less or 3.4 m |
Neutral reasons:
Sizes
Transport length | 13802 mm and 10710 mm |
Transport width | 3099 mm and 2480 mm |
Transport height | 3596 mm and 3870 mm |
Width with extended supports | 7753 mm and 6160 mm |
Operation
Tyre size | 14.00Rx20 and Front: 22.5 x 8.25 / Rear: 22.5 x 7.5 |
Gear box
Transmission type | synchronizer and mechanical transmission |
Carrying part engine
Manufacturer | G.M. and Caterpillar |
Model | 8V-71N and C-7 |
Booms
Maximum angle of ascent | 80 degrees and 80 degrees |
Images
Sizes
1. Transport length | 13802 mm | 1. Transport length | 10710 mm |
2. Transport width | 3099 mm | 2. Transport width | 2480 mm |
3. Transport height | 3596 mm | 3. Transport height | 3870 mm |
6. Width with extended supports | 7753 mm | 6. Width with extended supports | 6160 mm |
Booms
9. Minimum height at maximum lifting angle | 11 m | 9. Minimum height at maximum lifting angle | 7.6 m |
10. Max. height at max. lifting angle without boom | 34.7 m | 10. Max. height at max. lifting angle without boom | 19.2 m |
11. Minimum operating radius | 3 m | 11. Minimum operating radius | 1.5 m |
12. Maximum working radius | 30.5 m | 12. Maximum working radius | 18.3 m |
13. Maximum angle of ascent | 80 degrees | 13. Maximum angle of ascent | 80 degrees |