- Home/
- Comparison/
- Hydraulic Autocrane/
- Kato CR250 vs. Link-Belt HTC8660
Kato CR250 vs. Link-Belt HTC8660
8 reasons to buy Kato CR250:
Sizes
Upperstructure rear swing radius | 2400 mm and 3900 mm | 38 % less or 1500 mm |
Operation
Haul truck fuel volume | 300 l. and 283.9 l. | 5 % more or 16.1 l. |
Carrying part engine
Power measured at | 2800 rev / min and 1800 rev / min | 36 % more or 1000 rev |
Torque measured at | 1600 rev / min and 1200 rev / min | 25 % more or 400 rev |
Booms
Rotation speed | 2.6 rev / min and 2.5 rev / min | 4 % more or 0.1 rev |
Sections number | 6 and 4 | 33 % more or 2 |
Minimum height at maximum lifting angle | 8 m and 13.1 m | 39 % less or 5.1 m |
Maximum angle of ascent | 81 degrees and 78 degrees | 4 % more or 3 degrees |
12 reasons to buy Link-Belt HTC8660:
Sizes
Clearance | 350 mm and 345 mm | 1 % more or 5 mm |
Operation
Generator current strength | 135 amperes and 40 amperes | 70 % more or 95 amperes |
Axels number | 4 and 2 | 50 % more or 2 |
Gear box
Forward gears number | 12 and 4 | 67 % more or 8 |
Maximum forward speed | 97.7 km/h and 49 km/h | 50 % more or 48.7 km/h |
Carrying part engine
Full power | 272.2 kW and 158 kW | 42 % more or 114.2 kW |
Maximum torque | 1830.4 Nm and 696 Nm | 62 % more or 1134.4 Nm |
Displacement | 12.5 l. and 7.5 l. | 40 % more or 5.0 l. |
Booms
Max. height at max. lifting angle without boom | 35.8 m and 31 m | 13 % more or 4.8 m |
Maximum lifting capacity | 54431.1 kg and 25000 kg | 54 % more or 29431.1 kg |
Minimum operating radius | 2.1 m and 2.8 m | 25 % less or 0.7 m |
Maximum working radius | 30.5 m and 26 m | 15 % more or 4.5 m |
Neutral reasons:
Sizes
Transport width | 2395 mm and 2590 mm |
Transport length | 9065 mm and 13270 mm |
Transport height | 3400 mm and 3520 mm |
Width with extended supports | 6300 mm and 6250 mm |
Hauler length | 7245 mm and 11270 mm |
Operation
Tyre size | 385/95R25 170E road and Front 425/64R22.5, Rear 11R22.5 |
Operating voltage | 24 V and 12 V |
Working weight | 24000 kg and 29757.9 kg |
Gear box
Transmission type | remote mounted fully automatic transfer gearbox and mechanical transmission |
Reverse gears number | 2 and 2 |
Carrying part engine
Manufacturer | Mitsubishi and Caterpillar |
Model | C 6D16-TE1 and C13 |
Images
Sizes
2. Transport width | 2395 mm | 2. Transport width | 2590 mm |
3. Transport height | 3400 mm | 3. Transport height | 3520 mm |
5. Clearance | 345 mm | 5. Clearance | 350 mm |
6. Width with extended supports | 6300 mm | 6. Width with extended supports | 6250 mm |
7. Hauler length | 7245 mm | 7. Hauler length | 11270 mm |
8. Upperstructure rear swing radius | 2400 mm | 8. Upperstructure rear swing radius | 3900 mm |
1. Transport length | 9065 mm | 1. Transport length | 13270 mm |
Booms
9. Minimum height at maximum lifting angle | 8 m | 9. Minimum height at maximum lifting angle | 13.1 m |
10. Max. height at max. lifting angle without boom | 31 m | 10. Max. height at max. lifting angle without boom | 35.8 m |
11. Minimum operating radius | 2.8 m | 11. Minimum operating radius | 2.1 m |
12. Maximum working radius | 26 m | 12. Maximum working radius | 30.5 m |
13. Maximum angle of ascent | 81 degrees | 13. Maximum angle of ascent | 78 degrees |