- Home/
- Comparison/
- Hydraulic Autocrane/
- Kato NK250E-V vs. Liebherr LTM1070-4.1
Kato NK250E-V vs. Liebherr LTM1070-4.1
2 reasons to buy Kato NK250E-V:
Sizes
Upperstructure rear swing radius | 3240 mm and 3460 mm | 6 % less or 220 mm |
Booms
Rotation speed | 2.6 rev / min and 1.5 rev / min | 42 % more or 1.1 rev |
12 reasons to buy Liebherr LTM1070-4.1:
Operation
Haul truck fuel volume | 350 l. and 200 l. | 43 % more or 150 l. |
Gear box
Forward gears number | 12 and 5 | 58 % more or 7 |
Reverse gears number | 2 and 1 | 50 % more or 1 |
Maximum forward speed | 75 km/h and 65 km/h | 13 % more or 10 km/h |
Carrying part engine
Full power | 273.7 kW and 165 kW | 40 % more or 108.7 kW |
Maximum torque | 1700 Nm and 764 Nm | 55 % more or 936 Nm |
Booms
Maximum angle of ascent | 83 degrees and 80 degrees | 4 % more or 3 degrees |
Maximum lifting capacity | 70000 kg and 25000 kg | 64 % more or 45000 kg |
Maximum working radius | 40 m and 29.3 m | 27 % more or 10.7 m |
Sections number | 6 and 4 | 33 % more or 2 |
Minimum height at maximum lifting angle | 11 m and 12 m | 8 % less or 1 m |
Max. height at max. lifting angle without boom | 50 m and 33 m | 34 % more or 17 m |
Neutral reasons:
Sizes
Transport length | 11930 mm and 12520 mm |
Transport width | 2500 mm and 2680 mm |
Transport height | 3300 mm and 3900 mm |
Operation
Operating voltage | 24 V and 24 V |
Tyre size | 11.00-20-14PR and 14 R25 |
Gear box
Transmission type | Combined full mesh and synchronizer and ZF 12-speed gearbox with automatic control system AS-TRONIC |
Carrying part engine
Manufacturer | Mitsubishi and Liebherr |
Model | 6D22-1A and D936L A6 |
Booms
Minimum operating radius | 2.5 m and 2.5 m |
Images
Sizes
1. Transport length | 11930 mm | 1. Transport length | 12520 mm |
2. Transport width | 2500 mm | 2. Transport width | 2680 mm |
3. Transport height | 3300 mm | 3. Transport height | 3900 mm |
8. Upperstructure rear swing radius | 3240 mm | 8. Upperstructure rear swing radius | 3460 mm |
Booms
9. Minimum height at maximum lifting angle | 12 m | 9. Minimum height at maximum lifting angle | 11 m |
10. Max. height at max. lifting angle without boom | 33 m | 10. Max. height at max. lifting angle without boom | 50 m |
11. Minimum operating radius | 2.5 m | 11. Minimum operating radius | 2.5 m |
12. Maximum working radius | 29.3 m | 12. Maximum working radius | 40 m |
13. Maximum angle of ascent | 80 degrees | 13. Maximum angle of ascent | 83 degrees |