- Home/
- Comparison/
- Hydraulic Autocrane/
- Liebherr LTM1090-4.1 vs. Broderson IC20G
Liebherr LTM1090-4.1 vs. Broderson IC20G
11 reasons to buy Liebherr LTM1090-4.1:
Operation
Generator current strength | 170 amperes and 35 amperes | 79 % more or 135 amperes |
Axels number | 4 and 2 | 50 % more or 2 |
Haul truck fuel volume | 400 l. and 51.1 l. | 87 % more or 348.9 l. |
Gear box
Maximum forward speed | 75 km/h and 8.9 km/h | 88 % more or 66.1 km/h |
Carrying part engine
Full power | 355 kW and 38 kW | 89 % more or 317 kW |
Maximum torque | 3009.9 Nm and 142.4 Nm | 95 % more or 2867.5 Nm |
Booms
Max. height at max. lifting angle without boom | 50 m and 6.4 m | 87 % more or 43.6 m |
Maximum angle of ascent | 83 degrees and 75 degrees | 10 % more or 8 degrees |
Maximum lifting capacity | 90000 kg and 2268 kg | 97 % more or 87732 kg |
Maximum working radius | 46 m and 6.7 m | 85 % more or 39.3 m |
Sections number | 6 and 3 | 50 % more or 3 |
3 reasons to buy Broderson IC20G:
Sizes
Upperstructure rear swing radius | 752.9 mm and 3480 mm | 78 % less or 2727.1 mm |
Booms
Minimum operating radius | 1.2 m and 3 m | 60 % less or 1.8 m |
Minimum height at maximum lifting angle | 3.8 m and 11.1 m | 66 % less or 7.3 m |
Neutral reasons:
Sizes
Transport length | 12655 mm and 2767.6 mm |
Transport width | 2750 mm and 1219.2 mm |
Transport height | 3905 mm and 1676.4 mm |
Hauler length | 10534 mm and 2767.6 mm |
Operation
Operating voltage | 24 V and 12 V |
Tyre size | 14 R25 and 7.5x10 |
Carrying part engine
Manufacturer | Liebherr and Nissan |
Model | D846 A7 and H20 |
Images
Sizes
1. Transport length | 12655 mm | 1. Transport length | 2767.6 mm |
2. Transport width | 2750 mm | 2. Transport width | 1219.2 mm |
3. Transport height | 3905 mm | 3. Transport height | 1676.4 mm |
7. Hauler length | 10534 mm | 7. Hauler length | 2767.6 mm |
8. Upperstructure rear swing radius | 3480 mm | 8. Upperstructure rear swing radius | 752.9 mm |
Booms
9. Minimum height at maximum lifting angle | 11.1 m | 9. Minimum height at maximum lifting angle | 3.8 m |
10. Max. height at max. lifting angle without boom | 50 m | 10. Max. height at max. lifting angle without boom | 6.4 m |
11. Minimum operating radius | 3 m | 11. Minimum operating radius | 1.2 m |
12. Maximum working radius | 46 m | 12. Maximum working radius | 6.7 m |
13. Maximum angle of ascent | 83 degrees | 13. Maximum angle of ascent | 75 degrees |