- Home/
- Comparison/
- Hydraulic Autocrane/
- Terex TC40 vs. Terex 3063
Terex TC40 vs. Terex 3063
10 reasons to buy Terex TC40:
Sizes
Clearance | 376 mm and 330 mm | 12 % more or 46 mm |
Operation
Axels number | 3 and 2 | 33 % more or 1 |
Haul truck fuel volume | 430 l. and 170 l. | 60 % more or 260 l. |
Gear box
Reverse gears number | 2 and 1 | 50 % more or 1 |
Forward gears number | 16 and 7 | 56 % more or 9 |
Carrying part engine
Maximum torque | 1600 Nm and 820.3 Nm | 49 % more or 779.7 Nm |
Booms
Sections number | 5 and 3 | 40 % more or 2 |
Max. height at max. lifting angle without boom | 30.4 m and 19.2 m | 37 % more or 11.2 m |
Maximum lifting capacity | 40000 kg and 13607.8 kg | 66 % more or 26392.2 kg |
Maximum working radius | 28 m and 18.3 m | 35 % more or 9.7 m |
5 reasons to buy Terex 3063:
Gear box
Maximum forward speed | 119.1 km/h and 90 km/h | 24 % more or 29.1 km/h |
Carrying part engine
Power measured at | 2500 rev / min and 1900 rev / min | 24 % more or 600 rev |
Torque measured at | 1440 rev / min and 1400 rev / min | 3 % more or 40 rev |
Booms
Minimum height at maximum lifting angle | 7.6 m and 9.4 m | 19 % less or 1.8 m |
Minimum operating radius | 1.5 m and 2.7 m | 44 % less or 1.2 m |
Neutral reasons:
Sizes
Width with extended supports | 5950 mm and 6160 mm |
Transport length | 10571 mm and 10710 mm |
Transport width | 2550 mm and 2480 mm |
Transport height | 3433 mm and 3870 mm |
Operation
Tyre size | 385/65 R22.5 and Front: 22.5 x 8.25 / Rear: 22.5 x 7.5 |
Gear box
Transmission type | mechanical transmission: ZF ECOSPLIT and mechanical transmission |
Carrying part engine
Manufacturer | M.A.N. and Caterpillar |
Model | D2055 LF35 and C-7 |
Booms
Maximum angle of ascent | 80 degrees and 80 degrees |
Images
Sizes
1. Transport length | 10571 mm | 1. Transport length | 10710 mm |
2. Transport width | 2550 mm | 2. Transport width | 2480 mm |
3. Transport height | 3433 mm | 3. Transport height | 3870 mm |
5. Clearance | 376 mm | 5. Clearance | 330 mm |
6. Width with extended supports | 5950 mm | 6. Width with extended supports | 6160 mm |
Booms
9. Minimum height at maximum lifting angle | 9.4 m | 9. Minimum height at maximum lifting angle | 7.6 m |
10. Max. height at max. lifting angle without boom | 30.4 m | 10. Max. height at max. lifting angle without boom | 19.2 m |
11. Minimum operating radius | 2.7 m | 11. Minimum operating radius | 1.5 m |
12. Maximum working radius | 28 m | 12. Maximum working radius | 18.3 m |
13. Maximum angle of ascent | 80 degrees | 13. Maximum angle of ascent | 80 degrees |