- Home/
- Comparison/
- Hydraulic Autocrane/
- Terex TC60L vs. Terex 2857
Terex TC60L vs. Terex 2857
8 reasons to buy Terex TC60L:
Operation
Haul truck fuel volume | 430 l. and 170 l. | 60 % more or 260 l. |
Gear box
Forward gears number | 16 and 6 | 62 % more or 10 |
Reverse gears number | 2 and 1 | 50 % more or 1 |
Carrying part engine
Maximum torque | 1800 Nm and 705 Nm | 61 % more or 1095 Nm |
Booms
Sections number | 12 and 3 | 75 % more or 9 |
Max. height at max. lifting angle without boom | 44 m and 17.4 m | 60 % more or 26.6 m |
Maximum lifting capacity | 60000 kg and 12700.6 kg | 79 % more or 47299.4 kg |
Maximum working radius | 38 m and 16.8 m | 56 % more or 21.2 m |
6 reasons to buy Terex 2857:
Sizes
Clearance | 370 mm and 350 mm | 5 % more or 20 mm |
Gear box
Maximum forward speed | 119.1 km/h and 90 km/h | 24 % more or 29.1 km/h |
Carrying part engine
Power measured at | 2600 rev / min and 1900 rev / min | 27 % more or 700 rev |
Torque measured at | 1500 rev / min and 1400 rev / min | 7 % more or 100 rev |
Booms
Minimum height at maximum lifting angle | 7 m and 9.9 m | 29 % less or 2.9 m |
Minimum operating radius | 1.5 m and 2.5 m | 40 % less or 1.0 m |
Neutral reasons:
Sizes
Transport width | 2550 mm and 2480 mm |
Transport height | 3900 mm and 3580 mm |
Width with extended supports | 6300 mm and 5400 mm |
Transport length | 11245 mm and 10530 mm |
Operation
Tyre size | 385/65 R 22.5 and 10R 22.5F Goodyear G159, Rear 10R 22.5F Goodyear G124 |
Gear box
Transmission type | mechanical transmission: ZF ECOSPLIT and mechanical transmission |
Carrying part engine
Manufacturer | M.A.N. and Ford |
Model | D2066 LF33 and Powerstoke V8 |
Booms
Maximum angle of ascent | 80 degrees and 80 degrees |
Images
Sizes
1. Transport length | 11245 mm | 1. Transport length | 10530 mm |
2. Transport width | 2550 mm | 2. Transport width | 2480 mm |
3. Transport height | 3900 mm | 3. Transport height | 3580 mm |
5. Clearance | 350 mm | 5. Clearance | 370 mm |
6. Width with extended supports | 6300 mm | 6. Width with extended supports | 5400 mm |
Booms
13. Maximum angle of ascent | 80 degrees | 13. Maximum angle of ascent | 80 degrees |
9. Minimum height at maximum lifting angle | 9.9 m | 9. Minimum height at maximum lifting angle | 7 m |
10. Max. height at max. lifting angle without boom | 44 m | 10. Max. height at max. lifting angle without boom | 17.4 m |
11. Minimum operating radius | 2.5 m | 11. Minimum operating radius | 1.5 m |
12. Maximum working radius | 38 m | 12. Maximum working radius | 16.8 m |