- Home/
- Comparison/
- All Terrain Crane/
- Terex RC45 vs. Kato KR500
Terex RC45 vs. Kato KR500
3 reasons to buy Terex RC45:
Booms
Sections number | 6 and 5 | 17 % more or 1 |
Minimum height at maximum lifting angle | 9.5 m and 13.5 m | 30 % less or 4.0 m |
Minimum operating radius | 2.5 m and 3 m | 17 % less or 0.5 m |
8 reasons to buy Kato KR500:
Sizes
Upperstructure rear swing radius | 3300 mm and 3830 mm | 14 % less or 530 mm |
Motor
Maximum torque | 1029 Nm and 732 Nm | 29 % more or 297 Nm |
Displacement | 11.1 l. and 6.7 l. | 40 % more or 4.4 l. |
Gear box
Maximum forward speed | 53 km/h and 34 km/h | 36 % more or 19 km/h |
Booms
Max. height at max. lifting angle without boom | 38 m and 37.4 m | 2 % more or 0.6 m |
Maximum angle of ascent | 82 degrees and 78 degrees | 5 % more or 4 degrees |
Maximum lifting capacity | 50000 kg and 44000 kg | 12 % more or 6000 kg |
Maximum working radius | 31 m and 32 m | 3 % less or 1 m |
Neutral reasons:
Sizes
Chassis/base length | 6680 mm and 8480 mm |
Width with extended supports | 5830 mm and 7300 mm |
Transport length | 11245 mm and 11900 mm |
Transport width | 2550 mm and 3000 mm |
Transport height | 3390 mm and 3770 mm |
Wheelbase | 3620 mm and 4250 mm |
Operation
Fuel Capacity | 300 l. and 300 l. |
Operating voltage | 24 V and 24 V |
Tyre size | 16R25 and 18.00-25-28PR |
Motor
Manufacturer | Cummins and Mitsubishi |
Model | QSB6.7 and 6D22T |
Aspiration | turbocharging and turbocharging |
Gear box
Transmission type | DANA lot 20000 and remotely mounted gearbox with powershift |
Forward gears number | 6 and 6 |
Reverse gears number | 6 and 6 |
Images
Sizes
1. Transport length | 11245 mm | 1. Transport length | 11900 mm |
2. Transport width | 2550 mm | 2. Transport width | 3000 mm |
3. Transport height | 3390 mm | 3. Transport height | 3770 mm |
4. Wheelbase | 3620 mm | 4. Wheelbase | 4250 mm |
6. Width with extended supports | 5830 mm | 6. Width with extended supports | 7300 mm |
7. Chassis/base length | 6680 mm | 7. Chassis/base length | 8480 mm |
8. Upperstructure rear swing radius | 3830 mm | 8. Upperstructure rear swing radius | 3300 mm |
Booms
9. Minimum height at maximum lifting angle | 9.5 m | 9. Minimum height at maximum lifting angle | 13.5 m |
10. Max. height at max. lifting angle without boom | 37.4 m | 10. Max. height at max. lifting angle without boom | 38 m |
11. Minimum operating radius | 2.5 m | 11. Minimum operating radius | 3 m |
12. Maximum working radius | 32 m | 12. Maximum working radius | 31 m |
13. Maximum angle of ascent | 78 degrees | 13. Maximum angle of ascent | 82 degrees |