- Home/
- Comparison/
- Telescopic Forklift/
- Gehl DL7-44 vs. Gehl RS10-55
Gehl DL7-44 vs. Gehl RS10-55
3 reasons to buy Gehl DL7-44:
Sizes
Swing radius outside tyres | 3700 mm and 4240 mm | 13 % less or 540 mm |
Hydraulic system
Pump bandwidth | 162.8 l/min and 151 l/min | 7 % more or 11.8 l/min |
Gear box
Maximum forward speed | 35.4 km/h and 31.1 km/h | 12 % more or 4.3 km/h |
7 reasons to buy Gehl RS10-55:
Sizes
Clearance | 457 mm and 400 mm | 12 % more or 57 mm |
Operation
Fuel Capacity | 178 l. and 114 l. | 36 % more or 64 l. |
Lifting
Maximum lifting capacity | 4535.9 kg and 3175.1 kg | 30 % more or 1360.8 kg |
Maximum lifting height | 16800 mm and 13500 mm | 20 % more or 3300 mm |
Maximum load at maximum height | 2268 kg and 2721.6 kg | 17 % less or 453.6 kg |
Maximum front radius | 12600 mm and 9200 mm | 27 % more or 3400 mm |
Maximum load at maximum radius | 907.2 kg and 453.6 kg | 50 % more or 453.6 kg |
Neutral reasons:
Sizes
Length up to fork surface | 6300 mm and 6400 mm |
Between tyres width | 2500 mm and 2500 mm |
Headroom | 2400 mm and 2600 mm |
Wheelbase | 3300 mm and 3100 mm |
Operation
Working weight | 10546 kg and 12609.9 kg |
Hydraulic system fluid volume | 170 l. and 170 l. |
Motor
Power measured at | 2500 rev / min and 2500 rev / min |
Aspiration | turbocharging and turbocharging |
Manufacturer | John Deere and John Deere |
Hydraulic system
Type of pump | open center, double section and gear type pump |
Overflow valve pressure | 20684.3 kPa and 20684.3 kPa |
Gear box
Transmission type | powershift transmission and powershift transmission |
Forward gears number | 4 and 4 |
Images
Sizes
1. Length up to fork surface | 6300 mm | 1. Length up to fork surface | 6400 mm |
2. Between tyres width | 2500 mm | 2. Between tyres width | 2500 mm |
3. Headroom | 2400 mm | 3. Headroom | 2600 mm |
4. Wheelbase | 3300 mm | 4. Wheelbase | 3100 mm |
5. Clearance | 400 mm | 5. Clearance | 457 mm |
Lifting
6. Maximum lifting height | 13500 mm | 6. Maximum lifting height | 16800 mm |
7. Maximum front radius | 9200 mm | 7. Maximum front radius | 12600 mm |